Make show interfaces container aware. This is done by looking though
all podman containers for interfaces and looking up there info from
network namespaces on the main system / hypervisor.
Interfaces controlled by containers are clearly marked in the "show
interfaces" output, with a single gray row. Telling the user that they
belong to one or more named containers. The user can then run "show
interface name NAME" on interfaces owned by containers, which provided
some additional info, such as mac address and stat counters.
The patch also add support for printing veth peers which are owned by
containers.
Lastly, the patch also adds test cases for this functionality.
Signed-off-by: Richard Alpe <richard@bit42.se>
Use the same uptime representation as FRR does.
Example output:
DESTINATION PREF NEXT-HOP PROTO UPTIME
>* 10.0.23.0/30 0/0 e6 direct 20:10:05
192.168.3.0/24 110/1 e2 ospfv2 5d13h05m
>* 192.168.3.0/24 0/0 e2 direct 01w1d13h
Signed-off-by: Richard Alpe <richard@bit42.se>
FRR prints uptime different based on how long it is. Prior to this
commit yanger expected uptime to be on the format HH:MM:SS which it is
as long as it's shorter than a day. If it's longer the format changes,
this commit handles this.
The commit also adds unit test data triggering the different formats
(<day, <week, >week).
Side note:
cli-pretty could be made to represent the data on "FRR format" again,
which is perhaps more human friendly.
Signed-off-by: Richard Alpe <richard@bit42.se>
Fix flaky ietf-routing unit tests.
Prior to this patch, there was a unit-test race between Yanger
(sysrepo emulator) and cli-pretty, where the local system time could
change between crafting the data and printing it. This caused the CLI
output to change and the ietf-routing unit test to fail.
Fixes#668
Signed-off-by: Richard Alpe <richard@bit42.se>
In "14128047e18d statd: remove nl code and improve speed" the handling
of all interfaces where moved from statd to Yanger. This means statd no
longer tracks interfaces using Netlink, but instead relies on Yanger
to recognise and list all interfaces in the system. In the midst of
this change the ignoring of "internal" interfaces where lost.
In this commit we reintroduce this logic in Yanger and add a test case
that ensures internal interfaces isn't listed.
Fixes: 14128047e1 statd: remove nl code and improve speed
Signed-off-by: Richard Alpe <richard@bit42.se>
Yanger now has the ability to loop all interfaces (based on ip link),
this means we can run once for all interfaces.
Signed-off-by: Richard Alpe <richard@bit42.se>
Run ip link and ip addr once and handle the interface selection in
Yanger. This should be faster on systems with many ports and it
simplifies the CLI test files.
Signed-off-by: Richard Alpe <richard@bit42.se>
Actually a part of statd, but had to make
a separarate package to get it to work.
Statd helper-scripts are now pre-compiled instead of doing it
in runtime.
Fixes#379
This patch adds out-good-octets and in-good-octets as augment in
the infix-ethernet-interface yang model. These counters represents
OctetsTransmittedOK and OctetsReceivedOK from ethtool.
Signed-off-by: Richard Alpe <richard@bit42.se>
* Remove bogus ethernet statistics for br0
* Change parentbus for e0 and e1 to make them ethernet devices (not
virtio -> etherlike).
Signed-off-by: Richard Alpe <richard@bit42.se>
In this patch we add some arbitrary system output files which contains
interface data. Such as the output from "ip link" and "ethtool". These
files are used by yanger instead of running the actual commands.
Yanger then generates a lot of YANG json data, which are merged using
jq into something that looks like the sysrepo operational data on
a running system. This data is then passed though cli-pretty and its
ouput is compared to the static expected output in the .txt files in
cli-output.
Here's a basic flow overview.
* system-output/foo.json -> yanger ->> data
* system-output/bar.json -> yanger ->> data
* data -> merge -> sysrepo-operational-data
* sysrepo-operational-data -> cli-pretty -> output.txt
* compare output.txt too cli-output/show-foobar.txt
The result of this is that if something changes in yanger OR in
cli-pretty. The corresponding system-output file needs to be updated
for the test to pass. This is indented to catch regression where the
output is unintentionally changed.
Signed-off-by: Richard Alpe <richard@bit42.se>
Mattias Walström