Also, simplify board README a bit now that we know that you don't need
to flip the boot switch to program eMMC.
[skip ci]
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Missing BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y caused Buildroot to default
to legacy Makefile build system, which requires BR2_TARGET_UBOOT_BOARDNAME
instead of BR2_TARGET_UBOOT_BOARD_DEFCONFIG, resulting in a build error.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Add missing *.hash files for all board packages using the ix-board macro;
they declare LICENSE_FILES = LICENSE but had no hash file, producing a
warning during make legal-info.
Fix the date-cpp package where the hash file was named date.hash instead
of date-cpp.hash (package name is derived from the directory, not the mk
filename), causing Buildroot to skip the hash check entirely.
Add hash files for local-site packages confd-test-mode, netd, and
onieprom that declared LICENSE_FILES but provided no hash.
Also, rename package/date-cpp/date.mk to date-cpp.mk. Buildroot derives
the package name from the directory name, so the mk file must match. To
handle the archive name different we set DATE_CPP_SOURCE.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Add board support for the BananaPi BPI-R4 router board, based on the
MediaTek MT7988A (Filogic 880) SoC with quad-core Cortex-A73 CPU.
The BPI-R4 is the successor to the BPI-R3 but uses entirely different
silicon: the internal switch runs at 2.5 GbE per port, the two SFP+
uplinks use native USXGMII at up to 10 Gbps, and WiFi is provided by
a MediaTek MT7996E PCIe module supporting tri-band WiFi 7 (2.4/5/6 GHz).
Two board variants, BPI-R4-2g5 and BPI-R4P, replace one SFP+ cage with
a 2.5 GbE RJ45 port (using the MT7988A internal 2.5G PHY); the R4P adds
an optional PoE daughterboard on that port. Both use the upstream
mt7988a-bananapi-bpi-r4-2g5 device tree.
Interfaces:
- Standard R4: eth1 (gmac1/sfp2 LAN cage) → sfp2, eth2 (gmac2/sfp1 WAN cage) → sfp1
- R4-2g5/R4P: eth1 (2.5G PHY) → wan, eth2 (gmac2/sfp1 WAN cage) → sfp1
Factory reset / WPS button (GPIO14, active-low): detected by U-Boot at
boot for factory reset; reused by Linux as KEY_WPS_BUTTON at runtime.
eMMC install note: the MT7988A eMMC (pins 38-49) and SD card (pins 32-37)
use separate physical pads so there is no electrical bus sharing, unlike
some BPi-R3 configurations. However, a single MMC controller
(mmc@11230000) handles both, so only one is active per boot session.
The eMMC install procedure therefore still requires an intermediate SPI
NAND bootloader step until a Linux-side install path is tested.
SD card build (bpi_r4_sd_boot_defconfig) now uses the new
mt7988a_bpir4_sd U-Boot defconfig with cap-sd-highspeed enabled,
giving 50 MHz SD transfers instead of the previous 25 MHz legacy mode.
Also adds MT7988/MT7996 firmware support to the buildroot linux-firmware
package, for 2.5 GbE port PHY and WiFi7 extension board, and updates the
aarch64_defconfig, aarch64_minimal_defconfig, the arch README, CI
boot/image workflows, mkimage.sh, and the ChangeLog.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This fix the instability of the display on soft reboots,
previous it required a powercycle to get display to work properly
Add patches from rpi-linux, and a small fixup from me.
Signed-off-by: Mattias Walström <lazzer@gmail.com>
Issue #1461 turned out to just be a flaky test, the change in this
commit only bumps the release date.
[skip ci]
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Add several entries that were missing from the original release notes,
most notably the SBSA watchdog fix for CN913x (Marvell Octeon) platforms
and the BPI-R3 watchdog fix, plus show keystore, ixll scan, show system
temperature, WiFi signal strength inversion fix, and follow command fix.
[skip ci]
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
When a YANG model change breaks existing startup configs, a migration
script must be included or devices in the field may be left unbootable
after upgrade. Add a dedicated section explaining when scripts are
needed, where they live, and how they work.
Fixes#1459
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Unfortunatly the fix was entered in 25.10, but confd was not stepped
up until 25.11, so this should be for 25.10 but now it is for confd
version 1.6 (infix 25.11), as close as we can get.
this is a follwup for commit 7e37fc49a3
confd: prevent IP addresses on bridge ports
Bridge ports should not have IP addresses configured. The IP address
should be configured on the bridge interface itself, not its member ports.
Add YANG must expression to enforce this rule at configuration time.
Fixes#1122
Add a second discovery backend that reads mDNS neighbor data directly
from the sysrepo operational datastore via `copy operational-state -x
/mdns`, selectable with --backend operational.
Add an auto backend (the new default) that tries the operational data
first and falls back to avahi-browse if the `copy` command is
unavailable or mDNS is disabled (visible via "enabled": false in the
JSON). This makes the service work correctly in all configurations
without manual tuning.
Refactor TXT record parsing into parseTxt() and service/host assembly
into buildHosts(), shared by both backends. Extract fetchOpRoot() and
parseOperational() so scanOperational() and scanAuto() share the same
JSON fetch/decode and host-building logic without duplication.
Fix a bug where TXT values containing semicolons were truncated
(parts[9] → strings.Join(parts[9:], ";")), and apply decode() to TXT
values so avahi \DDD escapes are resolved. Add Apple device model
support via the am= (RAOP/AirPlay 1) and model= (AirPlay 2) TXT keys.
Display the last-updated timestamp in 24-hour format regardless of the
browser's locale.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Add reliable avahi client reconnect via explicit free+recreate, reduced
log verbosity (single 10s warning instead of 3×2s loop). Also, binary
TXT record filtering (UTF-8 + XML validity), and finally add a SIGHUP
handler for on-demand reconnect.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Infix now advertises _workstation._tcp, making devices appear
automatically in Windows Explorer's Network folder (Win 10 1709+).
Lead with this, show .local hostname usage for ping/SSH, and demote
the IPv6 multicast ping caveat to a note.
[skip ci]
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
statd now uses avahi-client for mDNS neighbor tracking, so the
native build needs libavahi-client-dev to satisfy pkg-config.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
has_fix() only checks that fix-mode is set (2d/3d), but altitude and
other fields may not yet be populated in the operational datastore when
gpsd is still processing its first NMEA cycles after boot. Calling
verify_position() immediately after has_fix() passes can therefore race
and fail with:
KeyError: 'altitude'
This manifests reliably on the second GPS receiver (gps1) after reboot,
because it is initialized slightly later than gps0 and hits the window
where fix-mode is set but altitude has not yet appeared.
not ok 11 - Verify gps1 position is near the coordinates
# Traceback (most recent call last):
# File "test/case/hardware/gps_simple/test.py", line 29, in verify_position
# alt = float(state["altitude"])
# ~~~~~^^^^^^^^^^^^
# KeyError: 'altitude'
Add has_position() to infamy/gps.py, which gates on fix-mode AND all
position fields (latitude, longitude, altitude, satellites-used) being
present. Replace the has_fix() polls in both the pre- and post-reboot
verify steps with has_position().
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Replace fragile SSH+jq approach for reading the chassis MAC with a
NETCONF query to ietf-hardware:hardware/component[name='mainboard'],
reading phys-address directly from the YANG model.
Also add until() polling to the chassis MAC and chassis+offset MAC
verification steps, consistent with the reset-to-default steps.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
A service restart triggered by finit during sysrepo callbacks can drop
an in-flight HTTP connection, causing copy("candidate", "running") to
fail with RemoteDisconnected. Add retry logic consistent with the
existing PATCH retry pattern in put_config_dict().
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
test_reset() triggers a config reload which causes services such as
rousette to restart. Wait for the transport to become reachable again
before returning from attach(), preventing subsequent API calls from
racing with a still-restarting backend.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Add --log-level command line option to filter out log messages from
lower log levels. Then fix the annoying CzechLight warning message
and useless "NACM config validation" log. Then add audit trail as
we have in netopeer2-server, and finish off by stripping redundant
fields from log message: timestamp, identity, and log level.
Fixes#892
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
ael-bot