- Basic DHCPv6 client, request a lease and verify Linux installs a
default route from the Router Advertisements (option not included
in DHCPv6), hence the 'enable-ra' option to dnsmasq. Also verify
DNS resolution over IPv6, including the resolvconf dance
- Prefix delegation, verifies that the client can actually request
and receives a prefix from a DHCPv6 server. We don't do anything
with it today though
Two new DHCP server implementations, the basic test relies on dnsmasq
and the prefix delegation test requires an ISC based dhcp server with
server side support for ipv6 prefix delegation. We could reuse the
latter for both tests, but this way we get compatibility testing.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Also, update docker/README, because after last confusing update I
couldn't follow my own instructions.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Basic DHCPv6 support as a per-interface ipv6 setting, not in line with
the IETF YANG model, which has this as a root container.
Note, this also fixes DHCPv4 option inference after the relocation of
/dhcp-client to /interfaces, in 764bd8e.
Fixes#1110
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Send 10 pings, expect at least one. The GRE test passes with two
received ICMP messages on the Styx test rig, while the VXLAN test
fails with -c 3, so try waiting a bit longer.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Used in Marvell Armada SOCs like the 37xx, 7k, 8k, and CN913x series.
Fixes the following kernel warnings:
[ 16.074759] crypto-safexcel f2800000.crypto: Firmware load failed.
[ 16.087330] crypto-safexcel f2800000.crypto: HW init failed (-2)
[ 16.102696] crypto-safexcel f2800000.crypto: probe with driver crypto-safexcel failed with error -2
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The put_config() retry loop was catching and printing RpcError
exceptions but never re-raising them after exhausting retries.
This caused tests to silently continue despite configuration
failures, masking validation errors.
Now properly propagates errors after all retries are exhausted,
matching the error handling behavior of the RESTCONF backend.
Fixes#1250
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
We use the infinitive, or basic form, in configure context, as do most
other network vendors, so let's do the same in admin exec context.
Also, drop the 'name' qualifier, it is not needed in configure context
so we shouldn't have to use it in admin exec either.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
In an effort to consolidate and use familiar command paths for our most
common commands, let's follow suite with Cisco, vtysh, et al.
Add deprecation warning to legacy 'show route [ip|ipv6]' command.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Since we just un-deviated this node to be able to create operational
data for ospf interfaces, we should also allow users to set it.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Collect more data from FRR to the OSPF and BFD operational datastore.
Refactor CLI commands to use the YANG datastore instead of vtysh.
Additionally, the BFD command(s) have been moved to the top level of
admin-exec, which is where vtysh has them.
Finally, preparing for future OSPFv3 support, all commands have been
given a new context under 'show ip ospf'. Deprecation warnings have
been added to the existing 'show ospf' commands.
Also, for consistency, all commands names in plural have been changed to
their singular form: routes -> route, interfaes -> interface, etc. This
is what vtysh, Cisco, and others do as well.
Fixes#1190
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Silently drop any area-type setting for ospf backbone in a migrate
script to prevent any field issues after upgrading to this fix.
Fixes#1247
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Release tarballs waste ~131MB per architecture by including both
rootfs.itb and rootfs.squashfs, even though rootfs.itb already
contains the squashfs (itb = 4096-byte header + squashfs).
This change removes rootfs.squashfs from releases and provides two
solutions for users who need it:
1. utils/extract-squashfs.sh - Full-featured utility for extracting
squashfs from release tarballs or .itb files. Includes validation
and helpful error messages.
2. board/common/qemu/qemu.sh - Auto-extraction support. When running
in initrd mode, automatically extracts rootfs.squashfs from
rootfs.itb if missing. Zero user impact - ./qemu.sh just works!
Space savings: ~262MB per release (2 architectures × 131MB)
Fixes#858
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Prevent patch releases from stealing the "latest" tag from newer minor
versions. Only vXX.YY and vXX.YY.0 releases should be marked as latest.
Fixes#1187
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Collect only the most relevant info for SBOM. The CycloneDX format seems
to be what most tools are standardizing around, and they suggest saving
manifest.csv and cpe.json files. This commit includes all *.csv files
and drops sources and licenses for release builds, as decided in #1192Fixes#1217resolves#1192
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
In bf2e739 a downgrade of Buildroot to 2025.02.6 was mistakenly merged,
this commit restores the submodule to the git revision prior to that,
Buildroot 2025.02.7-kkit, with KernelKit backports and upgrades.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Joachim Wiberg