This patch changes the way Infix DHCP and ZerocConf clients set their
routes in the system. Instead of setting them directly in the kernel
we ask FRR staticd to set them for us.
The reason for this change is to be able to override routes from these
protocols with locally set static routes. The routes are now set with
a distance of 5 and 254, respectively, while static routes by default
have a distance of 1. In contrast, kernel routes are always treated
by Frr as distance 0, i.e., they are preferred over static routes.
Finally, this patch drops the use of Linux legacy interface aliases, or
colon interfaces, in an effort to reduce confusion for end users. This
may give some odd results if using older tools like ifconfig, so we
recommend using 'show interfaces' or 'ipb a' instead.
Fixes#640
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch allows a user to specify a specific 169.254/16 address that
the zeroconf client starts with when probing for a free address. If the
probe fails it falls back to its default algorithm.
Fixes#628
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Normally, no logins are actually possible, but this will have two
desirable effects effects:
- /etc/issue will be printed when hitting return over the console,
allowing the user to see the bootstrapping errors again, without
having to reboot the system.
- On devleoper builds, with CONFIG_TARGET_ENABLE_ROOT_LOGIN, we can
login as root and debug issues.
When Infix Fail Secure Mode ends up in RMA state, runlevel 9, we should
not allow Finit to "time out" and give us a login prompt. Instead we
disable all login services in runlevels 7-9, reserving these extra
levels for future failure modes.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch drops auto-enable of services we want to be able to control
via NETCONF/YANG. SSDP and mDNS/SD enable/disable configure support,
using native models, will be included in the same PR and LLDP+SNMP may
come later, using std. IEEE/IETF models, they are not critical atm.
Fix#118
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- allow custom options sourced from optional /etc/default/smcrouted
- don't enable smcrouted by default when enabled in Buildroot .config
because normal use-cases require an /etc/smcroute.conf
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
When calling `make foo-rebuild` one expects all the registered hooks in
the foo package to have been called by Buildroot. The Buildroot manual
has this to say about the target-finalize hook:
> These hooks are run after all packages are built, but
> before the filesystem images are generated. They are
> seldom used, and your package probably do not need them.
The correct hook to use for target packages is POST_INSTALL_TARGET_HOOK.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Without --force-bind, the address is removed if another routable
address is added to the interface.
While this is likely something that should be configurable in the
future, we choose this mode as the default so that IPs used for
NETCONF connections are not dropped because other addresses are added.
With the new templating support in Finit, and this patch, we can now
very easily enable a ZeroConf service on, e.g., eth0:
$ initctl enable zeroconf@eth0
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
When calling 'make skeleton-init-finit-rebuild' to (re)install any new
or modified services, we cannot remove everything installed already.
That breaks what other packages may have installed already and is not
the Buildroot way.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
With the recent `if:<cond>` addition to Finit we can simplify a lot of
the logic for disabling and enabling features in Infix. Standardizing
on conditions that Finit provides.
We create boot/netconf, boot/etc, and boot/profinet conditions early,
after all filesystems have been mounted (and cleaned), so they are all
set before Finit loads its configuration files in runlevel S.
The default is still to boot into a managed NETCONF mode, since the end
goal remains to integrate PROFINET as yet another service. The other
mode, native /etc, should then be the only exception.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
An Infix build with PROFINET gears Net-SNMP heavily towards acting as a
servant to profeth (p-net stack). This will be hard-coded for now until
we've integrated it all better in Clixon.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
On rebuild (without distclean) the getty.conf contained two tty lines
for the same TTY, causing Finit to believe the command line args had
been changed between each reload -- and thus kicking out the logged
in console user who just typed `initctl reload`.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Need to rsync the whole skeleton since we provide more than just the
finit.d files, e.g. /etc/fstab, which we also modify in this .mk.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
1. Use same naming standard for quagga and frr
2. Only one of quagga and frr can be used at the same time
3. Subdirectories in available/ only in the skeleton, not on target
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Only install the corresponding Finit svc if the package is selected in
the Buildroot menuconfig. Some packages cannot be enabled by default
though, since they require a daemon configuration file, e.g. in the
case of ulogd it requires a valid /etc/ulogd.conf
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Also needs /var/cache/nginx when starting up. Requires separate patch
for now, but will be added a tmpflies.so plugn to Finit.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Mattias Walström