Used in Marvell Armada SOCs like the 37xx, 7k, 8k, and CN913x series.
Fixes the following kernel warnings:
[ 16.074759] crypto-safexcel f2800000.crypto: Firmware load failed.
[ 16.087330] crypto-safexcel f2800000.crypto: HW init failed (-2)
[ 16.102696] crypto-safexcel f2800000.crypto: probe with driver crypto-safexcel failed with error -2
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit adds support to simplify sdcard.img generation by downloading the
latest bootloader build for a board from the 'latest-boot' release tag. The
tarball is saved in dl/bootloader/ and is extracted to a temporary directory
in output/build/boot-$board-xxxx on every invocation of mkimage.sh. This is
used for invoking genimage and bmaptool before copying the resulting images
to output/images/. (If $O is set, it is used instead of output/, above).
New options:
-d Download latest bootloader build for the given board
-f Force re-download even if bootlaoder tarball existgs
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit drops the board specific defconfig in favor of proper BSP
support for the FriendlyARM NanoPi R2S to Infix as part of the default
Aarch64 build.
The name FriendlyARM was elected over FriendlyELEC ("new" name) to be
consistent with both kernel and Buildroot naming standards.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit consolidates all BSP support files into the Buildroot standard
board/ directory. The concept of selectable boards in menuconfig remains
as-is but now lives in board/ instead.
Drop support for board-specific post-build.sh scripts, not needed atm. and
we should really use Buildroot _POST_INSTALL_HOOKS in the board .mk files
instead.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
With the additional support for RPi3, including Zero 2W, this commit renames
all relevant directories and Config.In options to match.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit adds support for the Raspberry Pi CM4 based mini DFRobot IoT
Router board, SKU:DFR0767. It comes with an additional RTL8111 PCIe NIC
hence the addidtional kernel module and firmware. The latter fixes:
r8169 0000:01:00.0: Direct firmware load for rtl_nic/rtl8168h-2.fw failed with error -2
r8169 0000:01:00.0: Unable to load firmware rtl_nic/rtl8168h-2.fw (-2)
Please note, the change in BCMGENET from module to built-in is to ensure
it is probed before any PCIe NIC, both this board and the CM4-based NVME
NAS base board enumerate the built-in MAC as eth0.
Also, unlike the RPi 3B/4B, it is not a given fact that a CM4 based board
comes with WiFi onboard, and since most compute module setups are DYI, we
take the easy way out and leave it as an exercise to the user to add WiFi
interface to the config.
https://wiki.dfrobot.com/Compute_Module_4_IoT_Router_Board_Mini_SKU_DFR0767
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Add supoprt for infix-firewall.yang, modeled on the zone-based firewalld
The terminology is a mix of firewalld, classic netfilter and inspired by
Ubiquity. E.g., zone 'policy' -> 'action', and the zone matrix overview.
- Port forwarding allows forwarding a range of ports
- Operational data comes from firewalld active rules
- Firewall logging goes to /var/log/firewall.log
- Show implicit/built-in rules and zones (HOST) in firewall matrix,
includes "locked" policy for the default-drop behavior
- The zone services field in admin-exec 'show firewall' shows ANY when
the zone default action is set to 'accept'
- Zone 'forwarding' and 'masquerade' settings live in Infix in the
policys instead, meaning users need to explicitly add a policy
to allow both intra-zone and inter-zone forwarding
- Support for emergency lockdown (kill switch)
- Pre-defined services (xml+enums) are filtered and included as a
separate YANG model, extensions added for netconf and restconf
- Includes initial support for firewalld rich rules
firewalld policy rules, including rich rules, have an obnoxious priority
field which is extremely hard to get right, so in Infix we use the far
superior YANG construct 'ordered-by user;'. This ensure all rules are
generated in that order by setting the priority field, on read-back from
firewalld (operational) the priority field is used to sort the output
of rules in the CLI.
Fixes#448
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The Banana Pi R3 is a high-performance networking board featuring:
- MediaTek MT7986 ARM Cortex-A53 quad-core processor
- 4x Gigabit LAN ports (lan1-lan4)
- 1x Gigabit WAN port
- 2x SFP ports (sfp1, sfp2) for fiber connectivity
- Dual WiFi interfaces (wifi0 for 2.4GHz, wifi1 for 5GHz)
- USB support
- SD card boot support
Non-privileged users in the sys-cli group can now access sysrepo data.
The data is now solely protected by the NCAM rules and not Unix file
permissions. Any stray user that's not part of the (default) sys-cli
group still can't access syrepo, like users added from the shell.
Fixes#932
Signed-off-by: Richard Alpe <richard@bit42.se>
The reason for this is:
1) We want to use the same fetch tool for all operational data, to
avoid having duplicated xpaths scattered across the repo.
2) We want to call this directly from the CLI, which means it need to
be escape safe. A unprivileged user shall be able to use it but not
escape into a shell or do other malicious stuff.
Signed-off-by: Richard Alpe <richard@bit42.se>
ael-bot