This patch adds a background gps monitor to statd because the gpspipe
program, normally used to interface with gpsd, slows down access to the
operational datastore with *seconds*.
This background monitor is not load bearing for how chrony accesses the
gps + nmea information from gpsd, this is handled separately in SHM.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
RSSI is a vendor-specific relative index (0-255), while dBm is an
absolute power measurement. Since we report dBm values from iw,
rename the leaf to signal-strength for accuracy.
Also, spruce up the table a bit. Allow it to resize, let the SSID column
be flexible, and right-align column(s) with numbers.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Extend the WiFi station mode with rx-speed and tx-speed leaves,
mirroring what already exists for AP mode connected stations.
Display bitrates in 'show interface <wifi>' detailed view.
Also standardize speed units to kbps/Mbps across the YANG model.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Service descriptions or command arguments may contain special characters
that need to be escaped in JSON strings.
Example:
{
...
"command": "udhcpc -f -p /run/dhcp-client-wan.pid -t 3 -T 5 -A 30 -a1000 -S -R -o -O 1 -O 3 -O 6 -O 12 -O 15 -O 28 -O 42 -i wan -V "NanoPi R2S"",
...
}
Also, wrap add_services() in a try/except instead of testing for keys.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The table_width() class method was lost in b826bcb9d, so we take the
opportunit to refactor to SimpleTable.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Almost full support for WireGuard
admin@server:/> show interface wg0
name : wg0
type : wireguard
index : 10
mtu : 1420
operational status : up
ipv4 addresses : 10.0.0.1/24 (static)
ipv6 addresses : fd00::1/64 (static)
peers : 2
Peer 1:
public key : ROaZyvJc5DzA2XUAAeTj2YlwDsy2w0lr3t+rWj2imAk=
status : UP
endpoint : 192.168.10.2:51821
latest handshake : 2025-12-09T22:51:38+00:00
transfer tx : 1412 bytes
transfer rx : 1324 bytes
Peer 2:
public key : Om9CPLYdK3l93GauKrq5WXo/gbcD+1CeqFpobRLLkB4=
status : UP
endpoint : 2001:db8:3c4d:20::2:51822
latest handshake : 2025-12-09T22:51:38+00:00
transfer tx : 1812 bytes
transfer rx : 428 bytes
in-octets : 1752
out-octets : 3224
admin@server:/>
* Add support for AP (list connected stations)
* Add scan-mode (Scan without create a fully configured station)
Signed-off-by: Mattias Walström <lazzer@gmail.com>
Leverage the operational data to present a more human-friendly view of
containers in the CLI. Replacing the podman script wrapper.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch adds support for flexible columns. When a column is marked
as flexible it means it can be stretched when printing the table to an
optional minimal table width. Multiple columns can be marked and when
this occurs the padding is applied equally to all columns.
Also, make sure to only add 2 char padding between columns, not always
at the end, or we will require larger terminal than necessary.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Remove fixed lengths from Column class
- Add dynamic width calculation to SimpleTable
- Update service table to use new batched printing
Signed-off-by: Richard Alpe <richard@bit42.se>
Add resource-limit and resource-usage containers to YANG model. Podman,
and later conmon, enforce CPU and memory limits in a delegated cgroupsv2
hierarchy managed by Finit.
Resource usage is queried from 'podman inspect', which has more nodes
than what is currently possible to limit.
Requires Finit 4.15, or later.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Replace manual f-string formatting with SimpleTable/Column classes.
This new "framework" handles ANSI colors and padding. Removing the
hassle of manually calculating padding. You simply specify the header
with max number of chars the data can be and if you want left/right
padding and the "framework" calculates the padding for you.
We use this new "framework" to pretty print the newly added services
statistics.
Signed-off-by: Richard Alpe <richard@bit42.se>
This patch unlocks "routing interfaces" support in the ietf-routing yang
model. An array of interface with IP forwarding enabled.
Note, because of #515 we skip IPv6 forwarding for now. This will in the
near future be handled by a per-interface force_forwarding sysctl flag.
The 'show interface [ifname]' admin-exec command has been extended with
a Flags field for a quick overview of which interfaces have forwarding
currently enabled.
Fixes#647
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This fixes the following log message on systems w/o firewall enabled
dumping operational data:
Dec 2 09:24:57 test-00-02-00 yanger[5352]: Failed to connect to firewalld D-Bus: org.freedesktop.DBus.Error.ServiceUnknown: The name org.fedoraproject.FirewallD1 was not provided by any .service files
[skip ci]
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Due to their nature we cannot read out the RPM of the pwm fans on the
BPi-R3. But we can at least show it's alive, or steering out a signal
to the fan.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The EXPIRES column was misaligned due to multiple issues:
- Column header used width 10 while data rows used width 9
- Expiry values had leading space intended for the narrower width
- CLIENT ID column width (19) was too narrow for typical client IDs
like "01:00:a0:85:00:01:05" (20 chars), causing overflow
Fixed by using consistent width for EXPIRES, removing the leading
space from expiry values, and widening CLIENT ID column to 22.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The isoformat() method already includes the timezone offset when the
datetime object has timezone info. Appending "+00:00" created an
invalid double-timezone suffix like "2025-11-30T13:13:49+00:00+00:00"
which failed YANG validation.
Error was:
admin@bpi-26-60-00:/> show dhcp-server
Error running sysrepocfg: Command '['sysrepocfg', '-f', 'json', '-X',
'-d', 'operational', '-x', '/infix-dhcp-server:dhcp-server']' returned
non-zero exit status 1.
No interface data retrieved.
With syslog showing:
statd[4291]: libyang[0]: Invalid union value
"2025-11-30T13:13:49+00:00+00:00" - no matching subtype found
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Collect more data from FRR to the OSPF and BFD operational datastore.
Refactor CLI commands to use the YANG datastore instead of vtysh.
Additionally, the BFD command(s) have been moved to the top level of
admin-exec, which is where vtysh has them.
Finally, preparing for future OSPFv3 support, all commands have been
given a new context under 'show ip ospf'. Deprecation warnings have
been added to the existing 'show ospf' commands.
Also, for consistency, all commands names in plural have been changed to
their singular form: routes -> route, interfaes -> interface, etc. This
is what vtysh, Cisco, and others do as well.
Fixes#1190
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Wrap wpa_cli operations in try-except blocks to ensure WiFi errors don't
cause sysrepocfg to fail. Interface queries now return data for working
interfaces even when WiFi has issues.
Fixes:
admin@rpi-79-41-1d:/> show interfaces
Error running sysrepocfg: Command '['sysrepocfg', '-f', 'json', '-X', '-d', 'operational', '-x', '/ietf-interfaces:interfaces']' returned non-zero exit status 1.
No interface data retrieved.
admin@rpi-79-41-1d:/>
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The xPi's usually don't have a VPD so the chassis mac-address probed at
boot is usually null in /run/system.json. This commit adds a fallbkack
mechanism to populate this field so it can be used for unique hostnames
even on these boards.
Ths ietf-hardware.yang model does not have a notion of physical address,
so we augment one tht is generic enought to be used for other hardware
components than Ethernet, similar to what ietf-interfaces.yang use.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
