Basic support GRE and GRETAP tunnels both for IPv4 and IPv6.
Limited support right now, only possible to configure local
ip address and remote ip address.
* Use new cleanup in infamy to ensure the boot order gets restored
* Use new boot order in operational and use RPC to set boot order
to remove all SSH commands.
Make sure that we keep a record of the versions and boot source used
by all devices under test when running the full suite - in case we
ever suspect that there is a mismatch between the intended test image
and the actual one.
Since this test now needs to communicate with the devices, make sure
that we run the wait test first.
As it turns out, the setup with a 802.1D bridge in combination with
VLAN uppers stacked on the bridge ports is not possible to support
on mv88e6xxx ports.
Enable VLAN filtering to ensure proper isolation of the locally
terminated VLANs.
This will fail on a system running a vanilla kernel, where the dut's
ports are backed by mv88e6xxx, because:
1. The ports are attached to the same bridge, and are thus in the same
PVT group.
2. Creation of the VLAN uppers causes the DSA layer to add both ports
to the same VTU entry.
As a result, hardware behaves as if both ports had been configured as
tagged members of VLAN 10, instead of just terminating incoming
traffic locally.
Add this test to catch hardware which behaves in this way.
- Verify that broadcast packets are also properly moved accross the
bridge, i.e. the broadcast packets sent from vlan interface VLAN10
do not reach VLAN20
Fixes#773
This is to workaround #807. To test automatic router id selection
a new test is required, which sets interfaces and activate ospf in
separete NETCONF/RESTCONF query.
Initially done as a workaround for the MACVLAN create/remove race. But
even though the old version of this test now works, this refactor
provides better test step descriptions, making it easier to follow for
anyone looking to manually verify the functionality.
Make show interfaces container aware. This is done by looking though
all podman containers for interfaces and looking up there info from
network namespaces on the main system / hypervisor.
Interfaces controlled by containers are clearly marked in the "show
interfaces" output, with a single gray row. Telling the user that they
belong to one or more named containers. The user can then run "show
interface name NAME" on interfaces owned by containers, which provided
some additional info, such as mac address and stat counters.
The patch also add support for printing veth peers which are owned by
containers.
Lastly, the patch also adds test cases for this functionality.
Signed-off-by: Richard Alpe <richard@bit42.se>
SVG is a plain text file, better to see why it changed
than binary PNG. Also fix#744 by adding infix/OEM hash
to test specification
Signed-off-by: Mattias Walström <lazzer@gmail.com>
