The bootstrap script gets feedback from gen-admin-auth, on error we no
longer bail out but instead log the error and continue booting. This
way a developer build with root login can diagnose the error.
When logging the error we also set /etc/issue, /etc/issue.net for local
and remote login services, as well as the dedicated /etc/banner used by
OpenSSH, to hold the error summary. So when attaching to the console
port, or attempting to log in remotely with SSH, the error is printed
to indicate the device is not healthy.
Finally, since factory-config may be missing we need to bootstrap the
sysrepo db with something else, and fortunately we will always have a
failure-config to fall back on.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Break fallback hash to a separate function and allow gen_qemu_system_file()
to return the status. We'd like to update the qeneth templates to include
the same VPD data as is used with qemu.sh, but for now this is sufficient.
The Qemu detection has been changed to the, slightly more, secure detection
of qemu_fw_cfg filesystem.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit does several things. Its end goal is to fetch the admin
password hash from VPD memory during factory bootstrap.
To accomplish this probe creates a new file /run/system.json with
information read from a fw_cfg QEMU partition. The data from
/run/system.json is then later used during config bootstrap to fill in
the factory administrator password.
The idea is to make QEMU behave the same way hardware does, i.e. a
default/factory password should be fetched and used from
"hardware memory". The hardware portion of this is yet to be done.
Signed-off-by: Richard Alpe <richard@bit42.se>
Before this change, the following would happen in /lib/infix/mnt if a
factory-reset was performed:
1. Copy the contents of /var from Squash into /mnt/var and bind mount
/mnt/var over /var
2. Check for factory-reset
3. Clear /mnt/cfg/* and /mnt/var/*
4. Mount overlays
This ordering leaves the system with a completely empty /var on the
boot when a factory-reset is executed. Finit will fixup some of this
via its tmpfiles scripts, but we want the ability to ship files under
/var as part of the Squash and have these be available after the bind
mount, just like what happens at every other boot, when we don't
perform a factory-reset.
We solve this by delaying the bind mount (1) until after the reset has
been performed, together with all the overlays (4). While we're here,
make the fallback case, where no persistent /var is available, use a
bind mount as well. This should allow containers to be tested on such
setups, and it's one less flavor to test.
New order:
1. Check for factory-reset
2. Clear /mnt/cfg/* and /mnt/var/*
3. Mount overlays
4. Copy the contents of /var from Squash into /mnt/var and bind mount
/mnt/var over /var
Now the only difference between a regular boot and a
"factory-reset-boot" is whether (2) executed or not.
Relocate Finit conf to package, like klish and confd. Add condition to
ensure it is not started before mdev/udevd are up and kernel LED modules
have been loaded properly.
Also, add tmpfiles.conf to ensure /run/led is recreated at every boot.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Refactor factory-reset check slightly to check for a Finit condition
from the bootloader, as well as a custom check for br2-externals.
Note, the chgrp call has been extended to ensure admin users have
permission to create any file or directory in any overlay.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Currently does not need any conditions, but may later need to check for
loaded modules and other capabilities.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Instead, use the version from package/skeleton-init-finit, including the
ssh-hostkeys (previously ssh-genhostkeys) from the same package, because
it include extensive error handling and logging on failure.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Set the IP origin "random" for avahi IPv4LL addresses. The reason we
use random and not link-layer for link-local IPv4 addresses is the
fact that they are not based on link-layer info, such as IPv6 eui64
generated LL addresses.
Signed-off-by: Richard Alpe <richard@bit42.se>
Add a pristine copy of the current version of avahi-autoipd.action.
This script will be modified by us in later commits.
Signed-off-by: Richard Alpe <richard@bit42.se>
Flush addresses during shutdown and renewal with new address.
This is kind of a hack and needs further testing.
Signed-off-by: Richard Alpe <richard@bit42.se>
This fixes one bug in Infix, namely that dhcp removes all other
statically configured addresses. However it introduces a new one
where dhcp renewals with new ip addresses are added as "duplicates",
we fix this in a later commit in this patchset.
Signed-off-by: Richard Alpe <richard@bit42.se>
Add a pristine version of default.script to our local board override.
The reason for this commit is to track changes we do to it.
Signed-off-by: Richard Alpe <richard@bit42.se>
This file is read by iproute2 and creates valid names for ip proto.
Such as "static" in:
ip addr add dev e0 192.168.1.1/24 proto static
Signed-off-by: Richard Alpe <richard@bit42.se>
The port marker is intended to be used as a hint to the
auto-factory-config generator, so that it can create a bridge for all
switch ports by default. Therefore, revert to only include ports that
devlink reports as "flavour physical".
If we want to test this functionality in QEMU, we can use Rocker, the
virtual switch, instead.
On some system, certain interfaces are not usable by an end-user. The
canonical example of this is the ethernet MAC connected to a switch,
i.e. the DSA port.
Avoid having these be picked up in the generated factory-config, which
would be confusing to a user, by classifying them as "internal" ports
to be ignored by confd and friends.
This reverts an earlier change where nano was made the default editor in
a misguided attemt by yours truly to accomodate beginner users.
With the recent improvements of the CLI and the fact that the NETCONF
support has matured greatly, the need for a user-friendly editor have
diminished drastically. Editing system files is now limited to devs
and the core team prefers Mg over nano and vi.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This is not just for online viewing, these markdown documents are also
made available in the CLI itself from admin-exec as:
help [introduction | keybindings | tutorial]
With this commit we also add lowdown and the real less application to
be the Infix help system.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Add /bin/clish (symlink) to /etc/shells, as well as the traditional
/bin/{true,false} for completeness
- Validate shell string, with fallback to /bin/bash and /bin/sh
- Step infix-system revision, keeping old model in tree
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This allows an application to set a larger socket receive buffer size.
The default size is left unchanged (212992). 1MB is arbitrary chosen.
The main reason for this is to allow netlink kernel sockets to
hold more interface data while user-space is processing it. Typically
useful during main configuration changes where lots of kernel side
changes occur in short period of time, such as VLAN creation.
Signed-off-by: Richard Alpe <richard@bit42.se>
