Only physical interfaces have a permanent link address. So in order to
restore the default MAC generated by the kernel for interfaces such as
bridges, veth pairs, VLAN interfaces, and link aggregates, we recreate
them.
This patch adds support for checking if the phys-address attribute has
been deleted from bridge, vlan, and veth interfaces.
The netdag_must_del() function has been refactorored slightly so each
interface type is responsible for returning true if its condiitions are
satisfied.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Override read-only flag in YANG model
- Add support for setting custom MAC
- Add support for restoring permanent/original MAC
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Enable privacy feature, allows true random address instead of EUI64
- Allow global addresses to use router prefix
Fixes#136
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Set the IP origin "random" for avahi IPv4LL addresses. The reason we
use random and not link-layer for link-local IPv4 addresses is the
fact that they are not based on link-layer info, such as IPv6 eui64
generated LL addresses.
Signed-off-by: Richard Alpe <richard@bit42.se>
Modify existing IPv4 code to also add IPv6 address data to the
operational datastore. Also add support for handling link-layer IPv6
address.
IPv6 LL addresses generated with eui64 has "link-layer" origin
and random/secure generated LL addresses has "random" origin.
Signed-off-by: Richard Alpe <richard@bit42.se>
There might be more places in confd where this is needed. This works
for the most basic use case.
The proto set here is picked up by statd and converted into a YANG
origin, which is exposed to the user.
Signed-off-by: Richard Alpe <richard@bit42.se>
Add protocol from ip route (kernel) as origin in YANG model.
Note, we control the names static and dhcp in the file rt_addrprotos.
Signed-off-by: Richard Alpe <richard@bit42.se>
The old version (bash) where slow and cluttered. This version is much
faster and easier to read / maintain.
Signed-off-by: Richard Alpe <richard@bit42.se>
The old assumption was that only virtual links would have specific
"linkinfo" data. However, somewhere between 5.19 and 6.1, DSA ports
gained the ability to report its "conduit" interface via the
"linkinfo" attribute. That's great, but unfortunately it broke our
heuristic assumptions.
The new assumption is that only physical ports will report a
"parentbus" attribute. Let's see how long that will last :)
Bootstrap and daemon-specific helper scripts, sometimes known as foot
guns, should not be in $PATH.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch adds support for enabling LLDP using the std IEEE 802.1ab
LLDP yang model. An infix-lldp model is as well to reduce the set of
available parameters to a bare minimum (enabled), for now.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
I'm sorry, I'm just so used to this modus from the previous company.
The difference to 'exit', which is available on Cisco IOS, is that it
on the top-level config context does not exit/abort to admin-exec but
instead stops.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The script resides with confd and sets up our system for confd, this
should make it easier to rememeber where it's located.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Also, for usability, add `name:<SVC>` to each service declaration so they
can be located more easily and/or enabled/disabled using the service they
provide.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Everything (!) potentially shared with other sysrepo plugins/daemons and
helper functions (not yet in libite) that can be used by other daemons
have been relocated to libsrx.
Fix#116
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Replace the old "ip" output with data from the sysrepo operational
datastore. This data is piped through the new json-cfg-pretty script,
which formats the data in a nice human readable way.
Signed-off-by: Richard Alpe <richard@bit42.se>
Add IPv4 address info from "ip addr" json to sysrepo operational
datastore.
This patch adds: MTU and ip with prefix-length.
Signed-off-by: Richard Alpe <richard@bit42.se>
The commit adds a missing description and reorders some yang statements
to meet canonical ordering according to RFC7950, section 14.
It also relocates the /interfaces/interfaces/infix-if:port augment to
its own base model that the bridge (and later lag) models reference.
Solving the bisarre ordering issues we've seen previously.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch adds a new infix-interface-type, derived from the IANA base
type, allowing us to limit the list of supported native interface types.
Basing on IANA interface type ensure compatibility with other models,
e.g., standard/ieee/published/802.3/ieee802-ethernet-interface.yang,
which attaches itself to all interfaces of type ianaift:ethernetCsmacd.
Tested with yanglint and in Infix using ieee802-ethernet-interface.yang,
the 'ethernet' container was properly attached to interfaces of type
infixift:ethernet.
Tab completion in the CLI now lists only the supported types.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This further locks down confd to fall back to /bin/false as login shell
in case of internal errors.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch restricts the possible user shells to a subset of the list in
/etc/shells, which is generated by Buildroot. The default is 'false' to
prevent accidental shell access for non-admin role users.
The default shell for the admin user is now /bin/clish, which can be
further locked down before Infix v24.02 LTS.
In case of internal error the default fallback shell is now set to the
customizable LOGIN_SHELL, which currently is /bin/bash.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Also renames all klix_SYM@klinfix to SYM@infix, this is fine since we're
always calling these symbols with @infix.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Sync sysrepo conf settings, lots of new settings added, one removed
- Check if help topic exists
- password encrypt arguments should be optional, add SWITCH
- show datetime argument should also be optional, add SWITCH
- Trial, output factory- and startup-config colorized
- Switch to srp_prompt v2 for configure context
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Preparing for a "show system-information" as well, which still needs to
be discussed to determine contents. Some data also still missing, e.g.,
article/serial/product number db.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit changes the JunOS look of the CLI to something more akin to
a standard shell. To achieve this a %w format specifier to display the
path components is added to both klish and klish-plugin-sysrepo.
Before:
admin@infix-12-34-56:exec> configure
[edit]
admin@infix-12-34-56:configure> ediit interfaces interface eth0
[edit interfaces interface eth0]
admin@infix-12-34-56:configure> leave
admin@infix-12-34-56:exec>
After:
admin@infix-12-34-56:/> configure
admin@infix-12-34-56:/config/> edit interfaces interface eth0
admin@infix-12-34-56:/config/interfaces/interface/eth0/> leave
admin@infix-12-34-56:/> leave
However, due to unforseen problems with the naming of VIEWs in klish,
the admin-exec level "path" is hard-coded to "/" for now.
Future imporovement: fold in calling prompt@klish from srp_prompt, and
figure out why the "main" VIEW cannot be changed to "exec" without klish
just bailing out starting up.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
While spending the past couple of weeks actually trying to use the CLI,
I realized that it was very confusing to have a different behavior for
Ctrl-C than I was used to from regular shells (including the old clish
from $OLDJOB).
This change drops the Ctrl-C binding, restoring break/abort behavior,
and lets Ctrl-D be abort/exit. Pressing Ctrl-D in a sub-context in
configure calls exit, when in the top-most configure context we now
do an abort and return to admin-exec.
To apply the changes the user still has to type 'commit' or 'leave',
or tap Ctrl-Z as in the Cisco CLI.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This is not just for online viewing, these markdown documents are also
made available in the CLI itself from admin-exec as:
help [introduction | keybindings | tutorial]
With this commit we also add lowdown and the real less application to
be the Infix help system.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This adds support for the srp_help_text() symbol. It allows us to
display the full description for a leaf in a YANG model. This has
been added to the 'help [foo]' configure context command.
A separate admin-exec level 'help' command will be added in a later
commit. It will only be an intro to the CLI, keybindings, etc.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
