Five pages drew their per-row delete control as a bespoke <svg> "X"
glyph instead of the icon-trash partial used by Hardware, Routes,
Firewall, Interfaces and the yang tree fragments.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Mirrors the CLI's "show hardware" command — a single page that summarises
everything ietf-hardware exposes about the device:
- Board (chassis info: model, manufacturer, serial, base MAC)
- USB Ports (state + description)
- WiFi Radios (bands, standards, max-AP)
- GPS Receivers
- Sensors (grouped by parent component, all status values)
- Other Components (fallback so the page is exhaustive)
This is Phase 1 of webui-roadmap-v2. Phase 2 will trim the dashboard's
Sensors card to a few key vitals with an "All sensors →" link here,
fixing the existing height-clipping regression in the process.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The NTP page showed a red "Failed to fetch NTP data" banner whenever
/data/ietf-ntp:ntp returned 404 — which is the normal RESTCONF response
when NTP isn't configured at all. Treat 404 as the not-configured case
and render the empty-state card with a Configure → link, mirroring the
DHCP status page.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The errors.As(err, &rcErr) + StatusCode == http.StatusNotFound boilerplate
was repeated across six handlers. Replace with the IsNotFound helper
introduced in restconf/errors.go, dropping the now-unused errors import
from each affected file along the way.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Adds a per-user inactivity countdown that POSTs /logout after a
configurable timeout (default 15 min, persisted in localStorage)
and navigates to /login. Background pollers (watchdog, *counters
refresh) are excluded from the activity reset so they don't keep
the session alive indefinitely. htmx:responseError on 401 short-
circuits straight to /login so a server-side expiration doesn't
leave the UI failing silently.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Idea of wizard is to simplify:
- Re-adding Ethernet interfaces you've accidentally removed
- Setting up WiFi access point/station, incl. radio & PSK
- VLAN filtering bridges
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Adds Configure > Routes page for viewing, adding, editing, and deleting
IPv4 and IPv6 static routes. Each route row expands in-place to an edit
form; YANG field descriptions are shown as ⓘ tooltips.
Also fixes a goyang bug where inline augments inside a uses block were
never applied to the expanded tree, making it so next-hop-address and
outgoing-interface were missing from the schema — and therefore had no
tooltip text.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Navigating interfaces now work, and the tree follows the accordion style
like the rest of the UI.
Also, some updates to the curated pages: online help, lists of leafrefs
instead of hard-coded list options.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Implements the configure accordion section with a candidate datastore
workflow: opening Configure copies running → candidate (Enter), each
card saves directly to candidate, Apply copies candidate → running
atomically, and Abort discards by resetting candidate from running.
- RESTCONF client: add Put, Patch, Delete, GetDatastore, PutDatastore,
CopyDatastore, and a shared doRequest/writeJSON helper
- Handlers: ConfigureHandler (enter/apply/abort), ConfigureSystemHandler
(hostname, clock, NTP, DNS, motd, editor), ConfigureUsersHandler
(add/delete user, shell, password, SSH keys, NACM group membership)
- Status > NACM page: read-only group permission matrix derived from
ietf-netconf-acm groups + rule-list mappings
- Sticky Apply/Abort toolbar with custom confirm dialog; server returns
HX-Redirect:/ so HTMX does a full-page reload, keeping sidebar in sync
- Accordion persistence fixed: Configure excluded from localStorage so it
never auto-reopens after Abort/Apply; restore no longer closes an
accordion that contains the active page
- Password hashing by shelling out to mkpasswd(1)
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Add a zone-to-zone traffic matrix matching the CLI's traffic_flow logic:
- HOST row/column always present; zone→HOST uses zone action + services
(not policies), producing allow/conditional/deny verdicts correctly
- Clicking a matrix cell shows a detail panel with the policy or zone
reason for the verdict
- Conditional (⚠) detection for zones with services or port-forwarding
Enrich the policy and zone tables:
- Immutable (built-in) policies flagged with ⚷ in column header and row
- Policy rows show description as tooltip; sorted by priority
- Zones table renamed "Host Services" column; Policies drops Priority column
- Wide tables (Zones, Policies) span two grid columns like Dashboard WiFi
Fix the info-grid layout: #content lacked width:100% so margin:0 auto
was overriding flex stretch, collapsing the grid to a single column on
both the firewall and dashboard pages.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Display interfaces in a hierarchical tree: bridge and LAG parent rows
show a ▼ toggle in the tree column that collapses/expands their member
ports. The vertical connector line disappears when collapsed. Member
ports within each group are sorted alphabetically; loopback interfaces
always appear first, the rest alphabetically.
A ⚑ forwarding-flag column indicates which interfaces have IP
forwarding enabled, fetched concurrently from ietf-routing:routing.
The "Address" and "Detail" columns are replaced by a single "Data"
column matching the CLI layout: IP addresses, VLAN id, WiFi SSID/mode,
WireGuard peer count, etc. Table rows are top-aligned so interfaces
with multiple addresses don't cause odd vertical centering on other
cells; the two narrow icon columns (⚑ and tree) stay middle-aligned.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Split the old monolithic Hardware card into dedicated Board, WiFi, and
Sensors cards, matching the structure of `show system` / `show hardware`
in the CLI:
- System Information: add Current Time row, rename Firmware → Boot Partition
- Board: model, manufacturer, Base MAC only (no sensors)
- WiFi (new, conditional): all radios with supported bands, standards
(11n/11ac/11ax), and max AP count; card spans 2 grid columns so the
table never needs horizontal scroll
- Sensors (new, conditional, collapsible): all hardware sensors grouped
by parent component (SFP sub-sensors indent under sfp1/sfp2 headings);
JS "Show more" button injected only when content overflows 300 px
- Disk Usage: replaced wide multi-column table with a per-mount widget
(path + % on one line, health bar, "X free of Y" below); health colour
follows the same warn/crit thresholds as the memory bar
- Fix humanKiB to output IEC units (MiB / GiB) with a space, matching
the memory display style
- Fix info-table th wrapping (width:1%; white-space:nowrap)
- Fix JS collapsible init to run on DOMContentLoaded, not immediately in
<head>, so scrollHeight check has a real DOM to inspect
- CSS scroll-shadow on data-table-wrap: pure-CSS right-edge shadow
indicates overflow without needing JS or a scroll listener
- Equal-height grid rows via align-items:stretch; info-grid-span-2 for
cards with wide tables
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Replace the RAUC-centric firmware page with a cleaner layout:
- Show software slots (primary/secondary) using their bootnames rather
than internal RAUC slot names; filter to rootfs-class slots only
- Add boot order display (mirrors `show software` in the CLI)
- Show installed timestamp per slot (truncated to second precision)
- Fix Booted flag comparison: compare against bootname not slot name
- Lay out all three cards (Software, Install from URL, Upload & Install)
in a responsive grid instead of full-width stacked sections
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Anonymise the login page: generic "Login" title, lock icon instead
of product logo — makes the device harder to fingerprint.
Add a floating theme toggle button to the login page so users can
switch theme before logging in (cycles auto→light→dark).
Replace the four cluttered sidebar footer buttons (theme, download
config, reboot, logout) with an always-visible topbar user menu.
The dropdown shows the username, three theme options with a checkmark
on the active one, download config, reboot, and logout.
Refactor all handler page-data structs to embed PageData instead of
repeating the four base fields, and add Username (sourced from the
request context) so the topbar can display the logged-in user.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Joachim Wiberg