When multicast snooping is disabled on a bridge, mctl will exit with a
non-zero return code. Default to {} for these cases so that the bridge
and its ports are properly returned by yanger.
Fixes#618
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
LOG_DAEMON is a facility not an option. Replace with NDELAY option and
set facility properly in call to openlog() instead.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
When unit tests run in CI we may not have a syslog daemon available, in
such cases we set up a dummy handler.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
These changes are intended to make yanger a bit more robust. Instead of
bailing out on command errors, we now return empty string or object back
to the callee in run_cmd() and run_json_cmd().
One example where yanger previously exited hard, and dragged with it the
entire session, is when inspecting container status or when attempting
to restart container instances which have yet to be created/stopped.
Fixes#558
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Switch to logger, with syslog backend, instead of print() for logging
errors. This way we can log errors/warnings yet still return partial
JSON data back to statd. For example, failing to read JSON counters
from ethtool should not break "show interfaces", just return empty
array and log failure to run command.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Missing whitespace in assignments, before comments and methods
- Drop semicolons from end of statements
- Use 'if foo not in bar' instead of 'if not foo in bar'
- Some too long lines (not all, that would be painful)
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
On boards like the R2S and the VisionFive2 `ethtool --json -S ethX` is
not yet supported. This patch allows ethtool to fail, with a slightly
better log message, without breaking the operational datastore.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Actually a part of statd, but had to make
a separarate package to get it to work.
Statd helper-scripts are now pre-compiled instead of doing it
in runtime.
Fixes#379
The plain output mode prevents garbled JSON output due to the built-in
pretty-printer in mctl. Fixed in v2.1
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Translate LOWER-LAYER-DOWN -> LOWER-DOWN in "show interfaces" overview
and keep LOWER-LAYER-DOWN in detailed "show interfaces name eth0".
Issue #358
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch prevents statd from failing and logging errors on interfaces
currently in another network namespace.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Calling strlen() returns a size that's one byte less than what's needed
to store the string, so when comparing with sizeof(), which returns the
number of available bytes, we must compare >= and not just >.
Found by GCC using 'make check'.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
When building for cppcheck/coverity we may get a stupid linker that can
wind up not finding, e.g., fexist() in libite (-lite) if it's not added
last in the list of libraries.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch adds out-good-octets and in-good-octets as augment in
the infix-ethernet-interface yang model. These counters represents
OctetsTransmittedOK and OctetsReceivedOK from ethtool.
Signed-off-by: Richard Alpe <richard@bit42.se>
Some customers do not need, or do not want, to be able to run
containers, so all NETCONF related daemons and applications
need to take this into consideration.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Rename container/container -> containers/container
- Collapse containers-state into containers
- Complete refactor of network/host-network for improved UX. A new
must expression ensure mutual exclusion between host and networks
- Rename entrypoint -> command, for consistency (overrides ENTRYPOINT)
- Move nodes around a bit for more logical placement in model
- Clean out all traces of a container on removal
- Rename container image_id -> image-id for consistency
The active queue is for tracking currently running containers, ensuring
only relevant changes are applied, and also for container image upgrade,
at the end of which these scripts are re-run to activate the new image
Also, fix misplaced '-f' when pruning unused volumes.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
A very limited part of the YANG model is implemented so far, basicly it is OSPFv2 with multiple areas and you can change timers
for the interfaces. Limited operational support.
admin@infix-00-00-00:/config/> edit routing control-plane-protocol ietf-ospf:ospfv2 name default
admin@infix-00-00-00:/config/routing/control-plane-protocol/ietf-ospf:ospfv2/name/default/> set ospf area 0.0.0.0 interface e0 enabled true
admin@infix-00-00-00:/config/routing/control-plane-protocol/ietf-ospf:ospfv2/name/default/> leave
Silence kernel warning seems to be most secure option. Also, set
MFD_CLOEXEC, because if we ever fork off a child it should never
get a copy of this fd.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
There should be no functional change in this patch.
In this patch we rewrite the data collection in python3. This is the
new script called "yanger". It runs various commands on the system,
such as "ip" and "ethtool". It then mangles the output data from these
commands into valid YANG data.
The yanger script is started from the sysrepo callback in the statd c
code. Its output is parsed using lyd_parse_data_fd().
This means that the daemon part of statd is still written in c and the
new python code is only used when getting a query callback from
sysrepo. The c code still handles the interface netlink messages from
the kernel which controls what interfaces statd should do sysrepo
subscribe/unsubscribe to.
Signed-off-by: Richard Alpe <richard@bit42.se>
Add a python3 script "ethtool-to-json" which runs ethtool locally and
converts output which we are interested in into json. The script
simply json encodes the output from ethtool, i.e. it does not print it
in YANG format. This might be a good idea to change in the future if
the C code has to do a lot of ethtool to YANG translations.
The json output of the ethtool-to-json script is then parsed in C
using libjansson, translated to YANG and added to the operational
datastore.
Signed-off-by: Richard Alpe <richard@bit42.se>
Add counters from Ethtool groups to the operational datastore. The
mapping from Linux / Ethtool to YANG is described in the included
document eth-counters.md.
Signed-off-by: Richard Alpe <richard@bit42.se>
Joachim Wiberg