The tagline is read by Finit at boot, from /etc/os-release, and
logged when changing runlevel. The unicode charachter does not
survive the trip via syslog to log file.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
As of 4768cae6, we can use conserver/telnet to connect to the docker0
bridge IP:90XX, where XX is DUTXX. This was a great UX improvement
and this patch set aims to further the experience by:
- allow running Infamy (infix-test container) completely rootless¹
- reduce the expsed port range 50->10 (can be improved further)
- use 'podman --publish-all' ports, which allocates ten random
ports for the exposed Qemu telnet ports
- add Quick Start Guide to doc/testing.md
This restores the possiblity of running multiple "make test-sh"
instances, e.g., when multiple users share the same server.
The 'console' script included in this commit uses 'podman inspect' to
find the port number for a given DUT, and optional instance. It takes
either the console/dut number (1-N), or the dut name from the topology.
Also in this commit:
- set hostname for easy identification (for console script)
- set conatainer --name to hostname
- adjust workdir from buildroot to infix/test
- simplify PS1 and add time to prompt (when did the test finish?)
When running 'make test-sh' the prompt now tells you which instance you
are running, e.g., infmay10. Calling 'console 1 infamy10' connects to
console 1 (port 9001) on the infamy10 instance.
For more information, see the Quick Start Guide in doc/testing.md. It
shows how to use the new helper scripts: console and shell.
Fix#227
_______
¹) devs using podman, instead of docker, with slirp4netns installed, can
run the infix-test container completely rootless. We like this, and
as of today podman is our recommendation.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Sending SIGTERM to conmon is not a safe shutdown of a podman container.
To handle gracefully handle shutdown, restarting and provide an orderly
start of dependencies, we use the Finit sysv trick via container script
wrapper to call 'podman stop foo'.
However, since podman does not support syslog as output for containers
we employ an old FIFO trick with another program, k8s-logger, to allow
logs to reach syslog. Please note that k8s-logger must have properly
started before we call `podman start` -- this makes us fully dependent
on the 'container' wrapper script. Hence the documentation update.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Due to the deprecation of CNI i Podman[1], and its upcoming removal in
Podman v5.0, we decided to cut our losses and modify all documentation
and models to become backend neutral. We will continue to use CNI as
long as possible -- it gives us host interfaces, for instance, that is
not part of netawark yet, it seems.
Also, sync mount and volume documentation with YANG model changes.
[1]: https://blog.podman.io/2023/11/cni-deprecation-and-removal-from-podman-5-0/
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
After discussions in the development team, and an external demo, we
decided to rename file mounts to just mounts and adopt established
nomenclature.
With this change we now allow mounting any type of file or directory
from the host to the container, for regular files/directories a bind
mount is used. We also introduce 'source' and 'type', to support
mounting of host files and directories, the destination path has been
renamed to 'target'. The mount cousin, 'volume', which basically is a
specialized mount, has also been updated to use 'target'.
The 'source' and 'content' are now hidden behind a YANG choice to ensure
users can only use them the intended way (either/or not both).
Initial models had 'destination' (path) as mandatory, with this change
we can reintroduce that to ensure this proper configurations.
The documentation in both YANG model and markdown has been updated,
significantly, to provide lots of examples.
Please note, glob style mounts have not been tested, at all.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Brief overview of configuration support. Need to add admin-exec level
commands, but since operational and actions still are missing, we keep
it out until after the code review.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
A very limited part of the YANG model is implemented so far, basicly it is OSPFv2 with multiple areas and you can change timers
for the interfaces. Limited operational support.
admin@infix-00-00-00:/config/> edit routing control-plane-protocol ietf-ospf:ospfv2 name default
admin@infix-00-00-00:/config/routing/control-plane-protocol/ietf-ospf:ospfv2/name/default/> set ospf area 0.0.0.0 interface e0 enabled true
admin@infix-00-00-00:/config/routing/control-plane-protocol/ietf-ospf:ospfv2/name/default/> leave
In review discussions we have decided, for resonsons of consistency over
correctness, to rename this column to match the YANG model node name
rather than the Linux kernel name.
Also, right align the values. Numbers should always be right-aligned.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
With the latest bump of klish-plugin-sysrepo we no longer need the extra
container name in commands and paths.
Also, update the "show interfaces" example in the top-level README.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Adding missing information
- that PVID should (typically) be set for ports associated untagged
- that the bridge should associated with VLAN to terminate the VLAN
in the bridge
Providing an additional config example (VLAN atop brigde)
Adding picture for this and the existing example (VLAN atop Eth)
Adding info on name conventions (eth.20 vs vlan10)
[skip ci]
When released the YANG status section claimed IPv4/IPv6 MTU was
not-supported, which was very confusing since the following Changes
section clearly states added support for it.
The YANG Status section was wrong. It has also been cleaned up a bit.
E.g., no need to mention which native model provides an augment or a
deviation, to an end-user the only thing that matters is what is added
to or removed from the standard models.
[skip ci] becuase none of this warrants a rebuild.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Add counters from Ethtool groups to the operational datastore. The
mapping from Linux / Ethtool to YANG is described in the included
document eth-counters.md.
Signed-off-by: Richard Alpe <richard@bit42.se>
This makes it possible for projects using Infix as a br2-external to
override lots of OS-specific strings and contact information that
previously was hard coded.
The generated /etc/os-release now takes most of its data from .config
Worth noting is the changes in VERSION and BUILD_ID fields. The former
will be INFIX_RELEASE, during release builds, and the latter is always
the output from `git descibe ...`, or rather GIT_VERSION. This variable
can be overloaded as well.
See the help text and the new doc/branding.md document for details.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Fixes to IPv6 address origin (type 'random' rather than 'other')
now reflected in documentation.
Also using 'admin' instead of 'root' user in examples.
Improved "show interfaces" information is now
reflected in IP address examples
- source info added
- IPv6 addresses shown
Also added an example with IPv6 privacy for stateless autoconfig
Joachim Wiberg