Since we do not yet have lldpTxFast, or similar, to enable on LLDP, we
tickle both services to resend their HELLO frames on link down/up event
instead.
+ Reduces turnaround times drastically
+ Restore regression test for mDNS, which we lost recently
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Over the lifetime of Infix, so far, we've run into at least one customer
issue where we had qualms about our use of the local bit causing issues
with 3rd party software. In the end that was not the root cause of our
problems, but we spent way too much time worrying about it. Hence this
patch, which brings our virtual environments another step closer to the
real hardware that Infix runs on.
The OUI used is one of the "private" ones, taken completly at random.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Actually a part of statd, but had to make
a separarate package to get it to work.
Statd helper-scripts are now pre-compiled instead of doing it
in runtime.
Fixes#379
The container tests utilize the bundled curios-httpd, which clashes with
the new web services provided by nginx. So we need to disable it while
testing all the containers.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The Classic builds served for a while as an introduction to classic
embedded systems, with a user managed read-writable /etc. Today we
decided to firmly take the plunge into the future with NETCONF and
focus on our core platforms aarch64 and x86_64 (for Qemu).
The reasons are several: reduce overhead, simplify build and release
work, as well as manual testing, since Classic builds do not have any
automated regression testing.
The Classic builds may be resurrected later in a dedicated project.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Both L2 and L3 is supported.
With VLAN-filtering:
admin@infix-00-00-00:/config/interface/br0/> set bridge vlans vlan 1 multicast-filter 224.1.3.4 ports e0
Without VLAN-filtering:
admin@infix-00-00-00:/config/interface/br0/> set bridge multicast-filter 224.1.2.3 ports e0
Error: error creating container storage: the container name "infamy0" is already in use by "2011c2d7cb1737b788b854a8bd08e519f3cbd6e36dae4975784978cff1f238fc". You have to remove that container to be able to reuse that name.: that name is already in use
make[1]: *** [/home/github-runner/actions-runner/_work/infix/infix/test/test.mk:6: test-unit] Error 125
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Refactor test, remove fragile solution with tcpdump started AFTER
the linklocal was activated, this opened for a race condition since
it was listening for a message sent once.
Now wait for the linklocal address instead.
This patch adds out-good-octets and in-good-octets as augment in
the infix-ethernet-interface yang model. These counters represents
OctetsTransmittedOK and OctetsReceivedOK from ethtool.
Signed-off-by: Richard Alpe <richard@bit42.se>
With a self-hosted runner we get the following classic error when
calling `make test-unit`:
make[1]: Entering directory '/home/runner/_work/infix/infix/buildroot'
/home/runner/_work/infix/infix/test/env /home/runner/_work/infix/infix/test/9pm/9pm.py /home/runner/_work/infix/infix/test/case/all-repo.yaml /home/runner/_work/infix/infix/test/case/all-unit.yaml
the input device is not a TTY
make[2]: *** [/home/runner/_work/infix/infix/board/x86_64/board.mk:14: test-unit] Error 1
This patch drops interactive from all non-interactive docker sessions.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
As of 4768cae6, we can use conserver/telnet to connect to the docker0
bridge IP:90XX, where XX is DUTXX. This was a great UX improvement
and this patch set aims to further the experience by:
- allow running Infamy (infix-test container) completely rootless¹
- reduce the expsed port range 50->10 (can be improved further)
- use 'podman --publish-all' ports, which allocates ten random
ports for the exposed Qemu telnet ports
- add Quick Start Guide to doc/testing.md
This restores the possiblity of running multiple "make test-sh"
instances, e.g., when multiple users share the same server.
The 'console' script included in this commit uses 'podman inspect' to
find the port number for a given DUT, and optional instance. It takes
either the console/dut number (1-N), or the dut name from the topology.
Also in this commit:
- set hostname for easy identification (for console script)
- set conatainer --name to hostname
- adjust workdir from buildroot to infix/test
- simplify PS1 and add time to prompt (when did the test finish?)
When running 'make test-sh' the prompt now tells you which instance you
are running, e.g., infmay10. Calling 'console 1 infamy10' connects to
console 1 (port 9001) on the infamy10 instance.
For more information, see the Quick Start Guide in doc/testing.md. It
shows how to use the new helper scripts: console and shell.
Fix#227
_______
¹) devs using podman, instead of docker, with slirp4netns installed, can
run the infix-test container completely rootless. We like this, and
as of today podman is our recommendation.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- New helper class for container testing
- New helper class to urllib, Furl
Due to extremely weak Python-fu in the undersigned, this patch changes
the __init__.py file to add new helper classes for container tests.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Fix most of what pylint complains about
- Simplify constructs and add missing whitespace
- Simplify output of YANG model downloader
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
