Instead of publishing A/AAAA records for $(hostname).loocal with a CNAME
infix.local, we flip it around to take advantage of the mDNS conflict
resolution rules. This gives us infix.local for one device ont the LAN
and infix-2.local for the next.
Update all service records to *not* advertise hostname, but instead to
let Avahi imply that from the advertised A/AAAA and CNAME records.
Fixes#1387
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
RSSI is a vendor-specific relative index (0-255), while dBm is an
absolute power measurement. Since we report dBm values from iw,
rename the leaf to signal-strength for accuracy.
The trick to starting the scanner mode is to have a dummy network that
cannot associate with anything.
Fixes#1193
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This reverts commit bf1eca0567.
This mess up order if having more than 1 phy, have not been
reproduce the error that got me to introduce this fix from
the beginning.
Replace BusyBox udhcpc6 with OpenWrt's odhcp6c for improved DHCPv6
functionality and better integration with Router Advertisements (RA).
The primary motivation is support for a common ISP deployment scenario
where IPv6 addresses are assigned via SLAAC (from Router Advertisements)
and DHCPv6 is used in stateless/information-only mode to provide DNS
servers and other configuration options. This hybrid RA+DHCPv6 setup is
standard practice for many ISPs but was not supported by udhcpc6, which
treats RA and DHCPv6 as separate, non-integrated mechanisms.
Additional benefits of odhcp6c:
- Better IPv6 Prefix Delegation (IA-PD) support with proper handling
of delegated prefix lifetimes and renewal
- Native integration of RA-provided configuration (DNS servers, routes,
addresses) with DHCPv6-provided options
- Support for stateless DHCPv6 via information-only mode
To verify stateless DHCPv6 integration with SLAAC addresses - the ISP
scenario that motivated this migration, a new test case has been added.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Example usage:
./src/statd/python/yanger/yanger -p wifi0 -x "ixll -A ssh enp195s0f0 sudo" ietf-hardware | ./board/common/rootfs/usr/libexec/infix/wifi-channel-map.py
Show the congestion in the 2.4 band.
Signed-off-by: Mattias Walström <lazzer@gmail.com>
* Add support for AP (list connected stations)
* Add scan-mode (Scan without create a fully configured station)
Signed-off-by: Mattias Walström <lazzer@gmail.com>
Validate keys in gen_hostkey() before passing empty keys to shell scripts,
preventing:
Nov 04 2024 10:54:25 confd[2697]: SSH key (genkey) does not exist, generating...
Nov 04 2024 10:54:25 confd[2697]: writing RSA key
Nov 04 2024 10:54:26 confd[2697]: do_convert_from_pkcs8: /tmp/tmp.FH1Hr1 is not a recognised public key format
Also, fix base64 content formatting with proper 64-character line wrapping
using printf+fold instead of echo.
Use PKCS#1 RSA format for public keys as required by netopeer2-server, while
keeping PKCS#8 format for private keys. Use proper ssh-keygen format flag
(PKCS8) for correct conversion.
Fixes#1289
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Simplify fallback MAC detection to return lowest valid MAC address.
This is the easiest to document and explain to end users.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This allows us to gather better product information in /run/system.json
also for x86 based systems. For Qemu x86_64 systems the 'product-name'
changes from 'VM' to 'Standard PC (i440FX + PIIX, 1996)'.
Also, add new 'product-version' field for, e.g., board revisions, and add
missing 'serial-number' value for systems like Rasperry Pi that inject it
in the device tree.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Resolve race condition between DHCP and configured hostname by introducing
priority-based hostname management using /etc/hostname.d/ directory pattern.
Priority order (highest wins):
90-dhcp-<iface> - DHCP assigned hostname
50-configured - YANG /system/hostname config
10-default - Bootstrap/factory default
The new /usr/libexec/infix/hostname helper reads all sources and applies the
highest priority hostname. It exits early if hostname unchanged, preventing
unnecessary service restarts.
Fixes#1112
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Check if partition/LABEL is available before trying to run tune2fs and
mount commands on it. This change masks the kernel output:
LABEL=var: Can't lookup blockdev
commne when running `make run` on x86_64 builds.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
In 45efa94 we introduced new mount options for the: 'aux', 'cfg', and
'var' partitions. To save boot time, we also disabled the periodic fsck
check, which does not affect journal replay or other Ext4 safety or
integrity checks. The latter involved calling tune2fs at runtime, but
this caused the following to appear for the 'aux' partition, which is a
reduced ext4 for systems that need to change U-Boot settings, e.g., to
set MAC address on systems without a VPD.
EXT4-fs: Mount option(s) incompatible with ext2
Note, this is a "bogus" warning, setting the fstypt to ext2 in fstab is
not the way around this one. That's been tried.
To make matters worse, the new mount option(s), e.g., 'commit=30', gave
us another set of warnings from the kernel. This was due to the fstype
being 'auto', so the kernel objected to options not being applicable to
every filesystem it tried before ending up with extfs:
squashfs: Unknown parameter 'commit'
vfat: Unknown parameter 'commit'
exfat: Unknown parameter 'commit'
fuseblk: Unknown parameter 'commit'
btrfs: Unknown parameter 'errors'
This commit explicitly sets cfg and var to ext4, leaving mnt as auto, we
also check before calling tune2fs that the partition/disk image is ext4.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Reduce /var image size to 128M (resized at first boot anyway) and tune
mke2fs options for faster mounting. Set ext4 'uninit_bg' feature and
use '-m 0 -i 4096' extraargs in genimage to optimize filesystem creation
and reduce overhead. The genimage tool has several tweaks enabled by
default already, the 'uninit_bg' feature speeds up the time to check
the file system.
Disable periodic fsck with tune2fs at boot while keeping safety checks
intact. Adjust mount options in fstab to reduce journal syncs and
improve boot time.
Fix severe performance regression in find_partition_by_label() that was
calling sgdisk on every block device including virtual devices (ram, loop,
dm-mapper). This caused boot delays of up to 24 seconds on systems with
many block devices. Now skip virtual devices that don't have GPT tables,
reducing the delay to ~2 seconds.
Also clean up is_mmc() function to use cached result.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The xPi's usually don't have a VPD so the chassis mac-address probed at
boot is usually null in /run/system.json. This commit adds a fallbkack
mechanism to populate this field so it can be used for unique hostnames
even on these boards.
Ths ietf-hardware.yang model does not have a notion of physical address,
so we augment one tht is generic enought to be used for other hardware
components than Ethernet, similar to what ietf-interfaces.yang use.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
On some boards, and in particular with a hybrid mbr/gpt partition table,
like on the RPi64, we must resize ext *after* reboot.
Also, do some cleanup and consolidation of error handling to prevent us
from entering an endless boot loop.
Follow-up to 391e9715
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit refactors USB port probing to:
- Eliminate duplicates: previously, 'authorized' and 'authorized_default'
were listed as separate USB port entries (confusing). Now each USB
port is represented once, with the path pointing to the USB device
directory, confd appends the appropriate attribute file as needed
- Add support for Raspberry Pi 4B and CM4 USB port(s) using a generic
discovery function that scans /sys/bus/usb/devices for USB root hubs.
This should work seamlessly across all platforms
- For backwards compatibility and better UX:
- Single USB port systems: Named "USB" (no number)
- Multi-port systems: Named "USB1", "USB2", etc.
- Device tree-based discovery is tried first (for boards like Alder with
explicit DT USB port definitions), with fallback to generic discovery
for boards without DT
Fixes: #315
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
In setups like this...
CPU
eth0
|
.----0----.
| dst0sw0 |
'-1-2-3-4-'
|
.----0----.
| dst1sw0 |
'-1-2-3-4-'
...both eth0 and dst0sw0p4 are DSA ports. But the latter is _also_ a
physical port as far as devlink is concerned. As a result, it would
first be marked as "internal" and is then instantly reclassified as a
"port".
Catch this condition and stick with the initial "internal"
classification.
In addition to matching on interface names, add support for matching
on ethtool information.
Example:
{
"@ethtool:driver=st_gmac": {
"broken-mqprio": true
}
}
This would mark any interface using the "st_gmac" driver as having a
broken mqprio implementation. Whereas this:
{
"@ethtool:driver=st_gmac;bus-info:30bf0000.ethernet": {
"broken-mqprio": true
}
}
Only matches an st_gmac-backed interface at the specified location.
As matching becomes more complicated, use the shell implementation
from confd as well, to make sure that they are always in agreement.
This silences a bogus warning in the log when runparts is called with no
argument. I.e., when there is no product specific init files available.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The speed/duplex of a virtio interface is not eenforced in any way. The
driver initializes them to unknown/unkown:
https://github.com/torvalds/linux/blob/dccbe2047a5b0859de24bf463dae9eeea8e01c1e/drivers/net/virtio_net.c#L5375-L5381
It is however possible to set them since there are kernel subsystems
that rely on them, e.g., miimon in the bond driver, which in turn is
required for use with the 802.3ad (lacp) mode.
If we do not initialize speed/duplex the miimon will complain in the log
on virtual test systems every second:
Dec 13 22:34:08 laggy kernel: lag0: (slave e1): failed to get link speed/duplex
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This reverts commit 0ee973b2b2.
Turns out that this workaround simply reduced the size of the window
where this issue can occur.
The previous change now ensures that the DSA tree is always fully
setup by the time nameif runs.
Before this change, we relied on `udevadm settle` to act as a barrier
which we could only cross after all devices had been probed. As it
turns out, when drivers defer probing due to missing dependencies,
`udevadm settle` may exit (as no events are generated for a period of
time) before all devices are set up. This was the root cause behind
issue #685, for which #752 was the initial attempt at a fix.
As we know that systems using mv88e6xxx will always have a device link
referencing the conduit interface, add a script to finit's system
runparts directory, which will block while any device link consumers
are still probing.
As a consequence of this, we can no longer rely on the sysklogd.conf
shipped with finit. Therefore, install an Infix specific one, which
will make sure that the aforementioned script has run before launching
the syslog daemon, which most other things depend on.
Fixes#685
Running 'shred' on files stored on eMMC is pointless since the writes
are spread out over other sectors rather than overwriting the content
of the files as it was supposed to on old rotating media.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
When we opportunistically set up mqprio on all interfaces, we pass over
interfaces without offloading support. Catch that error message and log
an informational message about which interfaces are skipped.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Some services launched at bootstrap must be possible to override per
product. One such service is iitod, which manages the LEDs in Infix.
This change makes allows a product specific init script to clear the
led condtion, preventing Finit from lauching iitod. Also, rename the
ixinit-done condition to match the nomenclature used already.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch use the new compatible array in /run/system.json, installing
in order, least to most significant product overrides.
We also introduce a new way to run product specific scripts at init, to
override default behavior in Infix, e.g., LED control.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Joachim Wiberg