Add support for firmware updates via RAUC on aarch64. The created RAUC
bundle (images/infix-$BR2_ARCH.pkg) is signed with the same key used
to sign the raw FIT image.
Store FIT headers separately on aux, and place the raw SquashFS images
on primary/secondary. This removes the need to muck about with the
device mapper to setup the rootfs, and it allows us to boot using
syslinux files.
mkimage will generate an FIT image containing a signature of the
rootfs, where the data is kept out of the DTB data structure, i.e.:
.---------.
| DTB |
:---------:
| Padding |
:---------:
| |
| |
| rootfs |
| |
| |
'---------'
This is the on-disk format of Infix. At boot, we extract kernel and
device trees from the rootfs, and then use Linux's device mapper to
create a virtual block device that exposes the rootfs (squash).
In the new model, we have three sources of storage:
- /mnt/var: Mountpoint for a disk with the label "var"
- /mnt/cfg: Mountpoint for a disk with the label "cfg"
- /mnt/tmp: Mountpoint for a ramdisk
These sources are used for the following overlays:
- **/cfg, /home, /root**: /mnt/cfg if available, else /mnt/tmp
- **/etc**: /mnt/cfg if available and the boot/etc finit condition is
set, else /mnt/tmp
- **/var**: /mnt/var if available, else /mnt/tmp
- **/var/lib**: /mnt/var if available, else /mnt/cfg if available,
else /mnt/tmp
See board/common/rootfs/lib/infix/mnt for more information.
This change checks¹ if the system does not have a br0 interface, creates
a default one consisting of all switch ports in VLAN 1 of br0.
On top of br0 a vlan1 management interface is created with DHCP address.
For emulation and test purposes, a way to supply tap interfaces from
Qemu, and pass off as if they were regular switch ports, is added.
____
¹ obviously a better way to detect a factory-reset device is needed,
not all systems running infix will need or want a br0 interface.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This change replaces the BusyBox ifup/ifdown applets with the full-blown
ifupdown2 package. To get it fully working we also need to enable a few
missing kernel features: ipv4 + ipv6, multiple routing tables, and some
netfilter features. We take the opportunity to sync kernel features in
between the two archs as well.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Drop Cortex A72 in favor of more general A53 images
- Enable device trees for all supported EspressoBIN models
- Bump kernel to latest 6.0
- Currently only starts from SD card, so add genimage to post-build
- Create Ext2/4 disk image for SD card
- Add infix-rw partition to sd-card image
- The genimage tool needs genext2fs to create rw.ext4
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Upstream device trees specify regular PSCI support for SparX-5i, but
the U-Boot that Microchip ships does not actually support it.
Therefore, wrap the upstream version to disable PSCI and revert to
spin tables for SMP bringup.
Set up bridge first:
root@infix:~# ip link set dev eth0 up
root@infix:~# ip link set dev eth1 up
root@infix:~# ip link set dev eth2 up
root@infix:~# ip link set dev eth3 up
root@infix:~# ip link add name br0 type bridge
root@infix:~# ip link set dev eth0 master br0
root@infix:~# ip link set dev eth1 master br0
root@infix:~# ip link set dev eth2 master br0
root@infix:~# ip link set dev eth3 master br0
Start MRP server and add a configuration:
root@infix:~# mrp_server &
root@infix:~# mrp addmrp bridge br0 ring_nr 1 pport eth0 sport eth1 ring_role mrm
root@infix:~# mrp addmrp bridge br0 ring_nr 2 pport eth2 sport eth3 ring_role mrm
root@infix:~# mrp getmrp
bridge: br0 ring_nr: 1 pport: eth0 sport: eth1 ring_role: MRM ring_state: CHK_RO
bridge: br0 ring_nr: 2 pport: eth2 sport: eth3 ring_role: MRM ring_state: CHK_RC
Once all rings are set up:
root@infix:~# ip link set dev br0 up
For more information, see:
- https://github.com/microchip-ung/mrp
- https://lwn.net/Articles/809089/
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Tobias Waldekranz