Better than Busybox top, and can attach strace to services. So very
useful for debugging and monitoring a system.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
When dropping the net package in 5031ff6, a rebuild + test was not made
before pusing to main. As a result Infix suddenly lost one of its most
important packages, iproute2.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Replaced with full build in GitHub Actions. No other use-cases for it,
and too much of a hassle to maintain, so remove.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
In order get the ONIE EEPROM support and some mv88e6xxx related fixes,
move to 6.5.6, with the intention of upgrading again, to the next
longterm kernel, as soon as one becomes available.
Also, import patches from kkit-linux-6.5.y.
This commit fixes a regression introduced in 15572e9e where /bin/bash
was unintentionally set as the defalt /bin/sh in the system. This cause
several warnings and errors when a Bash-based /bin/sh tries to sources
/etc/profile because $SHELL identifies it as /bin/bash.
The ietf-system.yang model, with the infix-system.yang extensions,
declare a per-user SHELL that allow /bin/clish, /bin/bash, /bin/sh
and /bin/false. There should be a clear distinction between them.
This change also helps us keep bashisms away. If a script needs
Bash features, declare: #!/usr/bin/env bash
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit drops sulogin from BusyBox, as well as the Finit replacement,
in the NETCONF builds. The classic builds retain the Finit sulogin.
Furthermore, the Finit rescue mode is disabled (which uses sulogin), so
in case of trouble at boot, e.g. missing fstab or failure to fsck, the
system will no longer go to sulogin but instead log error to console and
reboot.
NOTE: the bootloader still needs to be locked down, otherwise a user
could just as easily change kernel cmdline to 'shell=/bin/sh'
Misc. reshuffle and defaults updated are due to make foo-update-defconfig.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Our custom version has gone from being newer than Buildroot's default
to being older, so there is no reason for us override it anymore.
The kernel has become a bit more picky and will give nasty error
messages if a link's PHY connection is not explicitly defined, but
instead relies on implicit defaults. This was missing from the CPU
port of the CRB, so we supply a small patch to fix that.
This is the layout expected by the "distro boot" effort in U-Boot.
As far as I understand, the contract is:
- U-Boot built for `fooboard` by `vendor`, will set the `fdtfile`
variable to `vendor/fooboard.dtb` - or more precisely: matching
whatever path the dtb is built at in the kernel tree.
- A distro (e.g. Infix) then just needs to specify the `fdtdir` in its
syslinux config (/boot in our case), and U-Boot will be able to find
the correct dtb.
Also renames all klix_SYM@klinfix to SYM@infix, this is fine since we're
always calling these symbols with @infix.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Turns out one of the reasons some keys did not work as they should in
certain commnands, most notably the Home/End in 'less', was due to the
default TERM variable being set to 'linux'. Changing to 'xterm' fixes
this issue, works with both console and ssh login, and from testing do
not seem to have any adverse effects on existing functionality.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This is not just for online viewing, these markdown documents are also
made available in the CLI itself from admin-exec as:
help [introduction | keybindings | tutorial]
With this commit we also add lowdown and the real less application to
be the Infix help system.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch does two main things:
1) Breaks "statd" free from "confd".
2) Introduces netlink monitoring of interfaces for sysrepo data.
Prior to this patch, sysrepo operation status was handled by code
named "statd" inside "confd". (Where confd is a sysrepo-plugin and
not a real daemon, which its name implies)
In this patch, we break out the interface part of the operational
sysrepo status, previously "statd", into a new daemon, also called
"statd".
The main reason for doing this is to avoid sysrepo threading, which
allows the new "statd" to have control over sysrepo events in the
same event pool as netlink events from the kernel. This in turn allows
statd to subscribe and unsubscribe dynamically to interfaces that
comes and goes during runtime (such as vlans).
It also makes sense that "statd" is in fact a finit daemon.
Signed-off-by: Richard Alpe <richard@bit42.se>
To set up proper factory defaults in Infix we need to drop the default
/etc/sysrepo datastores, initialized at compile-time by Buildroot when
installing netopeer2. The pre-initialized datastores cannot be set up
with new {factory} data in any other way.
The system factory-config is constructed from two parts: static data and
generated data. The latter is:
- hostname (product name + the three last octets of the base MAC)
- interface defaults (depends on number of ports on the device) that
enable IPv6 link-local on all interfaces, and
- per-device unique SSH hostkey for remote NETCONF access, requires
openssl binary on target. Can maybe use openssh for this (TODO).
The hostkeys are saved in /cfg/factory.d/ to prevent them from being
regenerated on every boot.
The script gen-hostkeys and the update of 10-netconf-server.json are
inspired by the netopeer2 scripts merge_hostkey.sh and merge_config.sh,
which do just about the same thing for regular systems.
We bootstrap sysrepo early with all the required models, netopeer2 as
well as our own, by calling sysrepoctl with initial data for {factory}
and {startup} datastores. A local patch to sysrepo is used to allow it
to look for an /etc/factory-default.json instead of compile-time default
data, the patch allows us to have variable amount of objects in the init
data, e.g. number of interface objects.
A system startup-config is generated, if one is mising, from {running}.
We then drop the initial {running} datastore before starting the daemons
sysrepo-plugind and netopeer2-server so that they, and our plugins, are
ready when we load the system startup-config.
Some sanity checks and debug possibilities:
- Ensure /etc/sysrepo exists before copying factory-config
- Keep factory-default.json for debug
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The idea for this is to maintain a smallest-possible type build that can
be used to run regression tests in GitHub Actions.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
These packages are not (yet) used in the NETCONF build, only make sense
in the Classic Infix builds. SMCRoute will be needed later on, but not
right now, so also remove.
The dhcpcd package is only used by ifupdown-ng in Classic, in NETCONF we
use avahi-autoipd and udhcpc.
iproute2 is selected by the net tool, so collapsed by menuconfig.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Initial analysis of system default users gives that there is no real
need for a default 'factory' user to trigger a factory reset. On an
actual physical device we will have a reset button or a menu option in
the bootloader to trigger factory reset, and in both physical and
virtual (GNS3) devices a logged in admin user can call the factory
command.
A virtual device that cannot be logged in to will have to be removed and
have its persistent backing store deleted, but that is the only real
downside to removing this user. The idea is to set a kernel command
line flag from the bootloader, and that could also be done from, e.g.,
GNS3.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- board/common: drop everything not needed by NETCONF mode
- board/classic: most board/common helpers relocated here
- Simplify Finit scripts for critical services
- Source variant from /etc/os-release to select ramdisk /etc
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
A long standing internal debate comes to its logical conclusion. Arch
naming should follow GCC. The "native /etc" has also found a better
name: classic!
README and GitHub action has been updated accordingly.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Drop unused packages in NETCONF (default) mode
In the default build we will use the net tool instead of iupdown-ng,
p-net & Profeth will move to customer-specifc builds with another
licensing model.
- Split out NETCONF specific parts from board/common to board/netconf
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This build is intended as a base reference and for use as a very simple
end device. The default starts DHCP and IPv4LL (ZeroConf) on eth0, but
can be configured by editing /etc/network/interfaces.d/*
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
With the new templating support in Finit, and this patch, we can now
very easily enable a ZeroConf service on, e.g., eth0:
$ initctl enable zeroconf@eth0
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This means that:
- The full boot order is now respected, using the magic "fallback"
varible in GRUB. This means that if an entry fails to load, we move
on to the next one in the defined order.
- Netbooting is supported. In this mode, GRUB will acquire an IP
address using DHCP, after which it downloads an image using TFTP.
- If we run out of valid entries, we always make sure to reboot. This
ensures that, e.g., a temporary TFTP server outage does not cause an
Infix device to get stuck in GRUB.
At the moment, the image handling is excruciatingly inefficient when
netbooting, as the image is downloaded multiple times behind the
scenes. Ideally, downloads would be cached, but a quick investigation
indicates that an implementation of this would take more time than we
can spare at the moment. Therefore, we settle for the working, though
wasteful, implementation.
