- Relocate python based probe to netconf builds, and
- Restore basic shell script based probe for classic builds
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
A very limited part of the YANG model is implemented so far, basicly it is OSPFv2 with multiple areas and you can change timers
for the interfaces. Limited operational support.
admin@infix-00-00-00:/config/> edit routing control-plane-protocol ietf-ospf:ospfv2 name default
admin@infix-00-00-00:/config/routing/control-plane-protocol/ietf-ospf:ospfv2/name/default/> set ospf area 0.0.0.0 interface e0 enabled true
admin@infix-00-00-00:/config/routing/control-plane-protocol/ietf-ospf:ospfv2/name/default/> leave
In review discussions we have decided, for resonsons of consistency over
correctness, to rename this column to match the YANG model node name
rather than the Linux kernel name.
Also, right align the values. Numbers should always be right-aligned.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
In this patch we add some arbitrary system output files which contains
interface data. Such as the output from "ip link" and "ethtool". These
files are used by yanger instead of running the actual commands.
Yanger then generates a lot of YANG json data, which are merged using
jq into something that looks like the sysrepo operational data on
a running system. This data is then passed though cli-pretty and its
ouput is compared to the static expected output in the .txt files in
cli-output.
Here's a basic flow overview.
* system-output/foo.json -> yanger ->> data
* system-output/bar.json -> yanger ->> data
* data -> merge -> sysrepo-operational-data
* sysrepo-operational-data -> cli-pretty -> output.txt
* compare output.txt too cli-output/show-foobar.txt
The result of this is that if something changes in yanger OR in
cli-pretty. The corresponding system-output file needs to be updated
for the test to pass. This is indented to catch regression where the
output is unintentionally changed.
Signed-off-by: Richard Alpe <richard@bit42.se>
This fixes [ERR] from CLI `show routes`, and broken operational status
in setups with DHCP client enabled by default.
Feature (static routing) introduced in release cycle, no need to bring
up in release notes.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
New command 'show software' to display software versions on each
partition, install date, and which one is currently booted.
admin@infix-00-00-00:/> show software
NAME STATE VERSION DATE
primary booted v23.10.0-132 2023-11-23T22:24:33+00:00
secondary inactive v23.10.0-132 2023-11-23T22:24:33+00:00
admin@infix-00-00-00:/> show software name primary
Name : primary
State : booted
Version : v23.10.0-132-gfd6e8ea
Size : 61992960
SHA-256 : ed6146aec462b77fb8631b14c48d281dd0f4fdb9c062f9482d863ee854081358
Installed : 2023-11-23T22:24:33+00:00
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Having klish as the login shell means losing lots of neat features we've
gotten used to: help text in less pager, initial terminal probing on the
console, and more.
This commit replaces the clish -> klish symlnk with a fuzzy bash wrapper
that fixes all the above annoying little things.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
By default, assume that any LED with the function "tp", "sfp" or
"port" is attached to either an Ethernet PHY or MAC, with support for
offloading the "netdev" trigger.
Use green LEDs to indicate link/activity.
Disable any yellow LEDs for now, later on we can add alarm indications
etc. to these.
There should be no functional change in this patch.
In this patch we rewrite the data collection in python3. This is the
new script called "yanger". It runs various commands on the system,
such as "ip" and "ethtool". It then mangles the output data from these
commands into valid YANG data.
The yanger script is started from the sysrepo callback in the statd c
code. Its output is parsed using lyd_parse_data_fd().
This means that the daemon part of statd is still written in c and the
new python code is only used when getting a query callback from
sysrepo. The c code still handles the interface netlink messages from
the kernel which controls what interfaces statd should do sysrepo
subscribe/unsubscribe to.
Signed-off-by: Richard Alpe <richard@bit42.se>
This affects CLI command such as:
> show interface name p1
Prior to this patch, this took roughly ~1200ms on hardware and with
the path it takes roughly 50ms.
Signed-off-by: Richard Alpe <richard@bit42.se>
Add a python3 script "ethtool-to-json" which runs ethtool locally and
converts output which we are interested in into json. The script
simply json encodes the output from ethtool, i.e. it does not print it
in YANG format. This might be a good idea to change in the future if
the C code has to do a lot of ethtool to YANG translations.
The json output of the ethtool-to-json script is then parsed in C
using libjansson, translated to YANG and added to the operational
datastore.
Signed-off-by: Richard Alpe <richard@bit42.se>
Add counters from Ethtool groups to the operational datastore. The
mapping from Linux / Ethtool to YANG is described in the included
document eth-counters.md.
Signed-off-by: Richard Alpe <richard@bit42.se>
This implements the new model infix-if-vlan.
The new CLI is:
root@infix-00-00-00:/config/interfaces/interface/vlan10/> set vlan id 10 lower-layer-if eth0
with an possible extra option for tag-type, default tag-type is c-vlan.
Pretty print all Ethernet frame statistics from the operational
datastore. Only in the detailed interface view.
Signed-off-by: Richard Alpe <richard@bit42.se>
The template and scripts for generating per-device factory-config have
been spread out across the repo. This is an attempt to gather all the
pieces to a single location for better overview.
Parts of factory-config will be reused for the new fail secure mode, in
the file failure-config. The beginnings of which are in this commit.
Other changes:
- cfg-bootstrap and confd-bootstrap have been collapsed into one
- let gen-hostname + gen-interfaces save to /cfg instead of /etc,
we've moved the /etc directory to read-only storage in /usr/share
- delay start of bootstrap and sysrepo-plugind after syslogd barrier
- set 'norestart' when loading startup-confg and failure-config,
no point in retrying if that fails, just go to error immediately
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This allows us to show empty values easier, while not affecting the
if statements.
This allows for a greater flexibility in which values are shown and
not. For example, we want to show empty columns for data that the
user adds/removes, such as IP addresses.
...
ipv4 addresses :
...
However, we don't want to show empty columns for information that
should never exist for a particular interface type.
Signed-off-by: Richard Alpe <richard@bit42.se>
The old version (bash) where slow and cluttered. This version is much
faster and easier to read / maintain.
Signed-off-by: Richard Alpe <richard@bit42.se>
The old assumption was that only virtual links would have specific
"linkinfo" data. However, somewhere between 5.19 and 6.1, DSA ports
gained the ability to report its "conduit" interface via the
"linkinfo" attribute. That's great, but unfortunately it broke our
heuristic assumptions.
The new assumption is that only physical ports will report a
"parentbus" attribute. Let's see how long that will last :)
Bootstrap and daemon-specific helper scripts, sometimes known as foot
guns, should not be in $PATH.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
