Make show interfaces container aware. This is done by looking though
all podman containers for interfaces and looking up there info from
network namespaces on the main system / hypervisor.
Interfaces controlled by containers are clearly marked in the "show
interfaces" output, with a single gray row. Telling the user that they
belong to one or more named containers. The user can then run "show
interface name NAME" on interfaces owned by containers, which provided
some additional info, such as mac address and stat counters.
The patch also add support for printing veth peers which are owned by
containers.
Lastly, the patch also adds test cases for this functionality.
Signed-off-by: Richard Alpe <richard@bit42.se>
Use the same uptime representation as FRR does.
Example output:
DESTINATION PREF NEXT-HOP PROTO UPTIME
>* 10.0.23.0/30 0/0 e6 direct 20:10:05
192.168.3.0/24 110/1 e2 ospfv2 5d13h05m
>* 192.168.3.0/24 0/0 e2 direct 01w1d13h
Signed-off-by: Richard Alpe <richard@bit42.se>
Fix flaky ietf-routing unit tests.
Prior to this patch, there was a unit-test race between Yanger
(sysrepo emulator) and cli-pretty, where the local system time could
change between crafting the data and printing it. This caused the CLI
output to change and the ietf-routing unit test to fail.
Fixes#668
Signed-off-by: Richard Alpe <richard@bit42.se>
- Enable OSPF route metrics in RIB, only defined for OSPF
- Enable 'active' route flag for RIB, same as 'selected >' in FRR
- Enable 'last-updated' route field for RIB, used for uptime
- Augment route in RIB with 'installed' flag, same as 'FIB *' in FRR
The CLI "show ip route" command has been updated accordingly. The
classic Cisco style output has been kept instead of separating the
routes into Active and Backup, as discussed previously. Because
when inspecting large route sets you want to compare same prefix
vs distance/metric to understand why a certain route is selected.
admin@example:/> show ip route
PREFIX PREF NEXT-HOP PROTOCOL UPTIME
> 0.0.0.0/0 1/0 192.168.0.42 static 0h2m6s
* 192.168.122.1
0.0.0.0/0 5/0 192.168.122.1 static 0h2m6s
0.0.0.0/0 254/0 e1 static 0h2m6s
>* 169.254.0.0/16 0/0 e1 direct 0h2m6s
>* 192.168.0.0/24 1/0 192.168.122.1 static 0h2m6s
>* 192.168.122.0/24 0/0 e1 direct 0h2m12s
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Actually a part of statd, but had to make
a separarate package to get it to work.
Statd helper-scripts are now pre-compiled instead of doing it
in runtime.
Fixes#379
Richard Alpe