These changes are designed to make the experience working with log files
easier. Both listing available log files and viewing them.
- replace C dir@infix with a shell script for easier extensions,
e.g., we want to show both available .cfg and log files
- add support for gunzipping .gz log files before viewing them
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
To support testing, the test-config.cfg file has been introduced in Infix.
Additionally, a "test mode" for the running image is required for this
configuration to be applied.
Basically the test-config will only be loaded when the device is in test mode,
which is determined by the presence of the /mnt/aux/test-mode file.
However, placing this file via the Qeneth system proved to be
inconvenient in the test environment. Therefore, it the entire image is
built in test mode, with the 'test-mode' file preloaded onto the disk
image (specifically in the auxiliary partition).
To support this, a new variable, (bool) DISK_IMAGE_TEST_MODE, has been
introduced:
enabled: the image will be built in the test mode;
disabled: the image will be built in the standard mode.
Part of issue #568
This patch greatly improves the security of the Infix factory reset by
replacing 'rm' with 'shred'. The shred tool overwrites the contents of
files three times. With the -z and -u options the last pass writes
zeroes and then uninks the files.
On the NanoPi R2S the factory-reset now takes 24 seconds:
Aug 11 16:00:34 infix mnt[121]: Resetting to factory defaults.
Aug 11 16:00:58 infix mnt[173]: Factory reset complete.
A visual aid is also added, setting *all* LEDs to on, that can be found
mounted on the device, before starting the file shredders. The LEDs are
reset back to off and SYS red blinking as soon as the wipe has completed
and iitod has been started.
Fixes#158
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch allows us to define the rauc manifest compatibility string with
menuconfig. The INFIX_IMAGE_ID is a direct replacement for the previously
composed "infix-$ARCH" in mkrauc.sh.
For example, the compatibility string "infix-aarch64" is replaced for the
NanoPi R2S with "infix-r2s" to ensure users get a proper warning if they
try upgrading to an image that maybe boots, but is not likely to work.
The CLI upgrade command gets a 'force' flag to override the compat string.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
U-Boot (2024.07) does not yet support the 'metadata_csum' feature flag
to Ext4 file systems. So let's disable it for now in mkaux.sh so we
can allow builds for, e.g., the R2S and VisionFive2 boards to modify
and save their U-Boot environment.
Needed on the NanoPi R2S to set ethaddr + eth1addr since it does not
have any VPD EEPROM mounted.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
For systems with multiple paths to the network, different situations
may call for different paths to be used. Therefore, allow the user to
override the active interface via the environment on the auxiliary
partition.
The default (defined the bootloader's device tree) is still used in
cases when nothing else is specified in the environment.
For consistency with the / + /usr merge, see 2194f7be, let's move the
last remnants in /: /libexec/infix to /usr/libexec/infix
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Ensure Finit installs its files to /usr/lib/finit when building with the
merged-usr config option. For consistency we adjust --exec-prefix, which
is the base for $libdir, meaning also /libexec is moved to /usr/libexec.
Finit tracks the paths internally, we only need to update runparts probe.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Consolidate empty password and $factory$ hash extraction to a common
function called before set_pasword(). The purpose is to ensure all
error handling and log messages are in the same place, except for
missing factory-password-hash, which is now treated as a PANIC and
logged to /dev/console.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
When syncing interface defaults at boot, some settings are read-only and
some are write-only. Filter these out so sysctl does not log any bogus
Permission Denied messages.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
cp: cannot stat '/home/lazzer/Documents/addiva/infix/board/common/rootfs/bin/onieprom': No such file or directory
Signed-off-by: Mattias Walström <lazzer@gmail.com>
This change builds on top of the earlier work to bootstrap Infix YANG
modules at build time. Adding a step at the end of post-build.sh to
call the yangdoc tool. The resulting yangdoc.html is a stand-alone HTML
file of (almost) all YANG nodes. Almost because some top-level nodes
are unused by Infix atm. and have been filtered out for readability.
Fixes#432
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
With the recent changes to confd to support: hostname format specifiers,
$factory$ default keyword for password, and on-the-fly generation of the
NETCONF SSH host keys, the system no longer depend on the very intricate
confd gen-* scripts to create factory-config and failure-config.
This patch set adds support for detecting and installing product/vendor
specific static factory-config and failure-config files. See the confd
README for details.
To facilitate generation, e.g., of the NETCONF SSH host keys, the confd
daemon must be running when bootstrapping the first startup-config from
eithe generated or static factory-config. This is why the bootstrap and
load helper scripts have been changed.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch adds support for an empty "genkey" pair in the keystore for
the NETCONF hostkeys. Primarily intended for static factory-config.
When a configuration is loaded and confd detects a missing public or
private key in the "genkey" asymmetric key, it loads generated keys
from disk and store in the running datastore.
Fixes#435
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Add metadata 'version' field to ietf-system to be able to detect .cfg
file version. Fixes#308
Add early boot script to automatically migrate configuration files of
older version to new syntax. Fixes#178
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Since a user has access to the shell in developer mode, we might as
well allow booting through the standard boot scripts as well. This
means that a product with a bootloader only accepting images signed by
Company A can now be configured to netboot a regular developer image
without any special user interaction.
If we receive an option 67 (bootfile) matching http://IP/rootfs.itb,
use U-Boot's wget implementation to download the file. The web server
must listen on port 80. tftp:// is also supported.
Without a protocol prefix, assume that the bootfile should be fetched
using TFTP from ${serverip}.
Generate a boot menu, accessible with C-c during a short window, where
a user can interactively select a custom boot source and/or trigger a
factory reset of the device.
With this in place, we should always be able to unbrick a device, as
the image can be fed over the network, and local data can be ignored
by opting in to a factory reset.
By default, Linux will map an IP packet's TOS field into skb->priority
when acting as a router. Unfortunately this is only globally
configurable (per network namespace), which leaves us with the
following dilemma:
If we keep reclassification enabled, then a setup like this...
vlan1 vlan2
\ /
br0
/ \
e1 e2
...would likely not work as expected because any priority information
from hardware, that might be mapped to skb->priority via vlan1's
ingress-qos-map, would then be replaced by the standard TOS-mapping on
the routing boundary.
On the other hand, if we disable reclassification, then we won't be
able to source priority information from the TOS field when no other
source is available, as is the case when the source interface is a
regular NIC.
Given that the primary use-case is to run on switchdev ports, we will
most likely always have priority information available from hardware,
which is why we opt to disable the reclassification.
If this ever becomes configurable per interface, then we could open up
the configuration to let users define the policy of which layer's
priority should take precedence.
Opportunistically look for interfaces with multiple transmit queues
and hardware support for the mqprio queuing discipline. For every
matching interface, set up mappings from kernel-internal packet
priorities, via traffic classes, to transmit queues such that as many
high priorities as possible are scheduled on separate queues.
This makes it easier to add more scripts without having to update the
finit config file, and it clarifies which of the scripts in
/libexec/infix only execute at boot.
This enables access to /restconf on port 443 over HTTP/1.1 and HTTP/2
via rousette when enabled.
Also, slight refactor to allow including /restconf and /netbrowse as
optional locations in the main servier directive.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
When interface naming switched to use 1-based indices instead of
0-based, the topology generation was overlooked thus breaking tests
against a `make run` instance.
Bring everything back in sync.
- Add sshd 'UsePAM yes'
- Buildroot automatically adds and enables:
- /etc/pam.d/ with authentication for login, sshd, and sudo
- PAM support in BusyBox login
Also, prepare for adding RADIUS authentication support to ietf-system
the only tricky part is testing against a RADIUS server.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Assume that the caller always want to create a new partition table,
even in scenarios where one already exists. This allows devices to be
reprovisioned with a newer image, for example.
Fixes#394
Joachim Wiberg