This patch makes it possible to use format specifiers to "uniqiefy" a
container's hostname in the same way as with ietf-system hostname.
The following specifiers are currently supported:
- %h default hostname from /etc/os-release
- %i value of ID from /etc/os-release
- %m last three octets of base MAC, e.g., c0-ff-ee
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Unlock setting a custom interface name inside the container. This aids
se-cases where this is needed and provide a better user experience, for
example when upgrading containers. Not having to reboot the host just
to activate an upgrated container.
Fixes#708
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Dummy interfaces are useful for configuring routes and testing network
services without having to allocate physical or virtual interfaces.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
For products with a static factory-config, or customers generating with
an older syntax, attempt migration in case of bootstrap failure.
Refactor logging to drop '-s'. This prevents duplicate log messages
since bootstrap always runs after syslogd has started and all stdout
is always logged.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch relocates the 30-cfg-migrate init script to confd, where it
belongs, renaming it migrate and installing into /usr/sbin.
The script has been heavily modified to be more user friendly, as well
as useful for automated restore operations, to be able to refresh old
backups to modern .cfg file syntax.
Example (injected phys-address error):
admin@example:~$ migrate -c /etc/factory-config.cfg
/etc/factory-config.cfg: has syntax error, requires migrating.
Since backups are created with the old confd sytanx version in the name,
the backup functionality has been kept in the script.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit replaces the ietf-interfaces deviation for phys-address,
used to set custom MAC address on interfaces, with a more flexible
approach which can calculate the new MAC address based on the device's
chassi MAC, with or without an added offset.
The regression test has been updated to test all variants.
Resolves: #680
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Dagger did delete of the VLAN after it had configured it.
Resulting in that the new VLAN configuration was lost.
This will first delete all untagged/tagged ports that should be removed,
when they are removed, add the new or changed ports.
Instead of renaming the yang-file instead we keep the yang file
with the actual content linear, easier to review and easier to
follow changes. This only applies on all infix models,deviations
and auguments.
The actual infix-system@2038-01-19.yang is just a symlink to
ietf-system.yang which contains all the code.
Refactor 0f9d429 to first check if the .cfg file has any routing
protocol active before converting the type's value.
This fixes a regression in the release cycle that otherwise would
cause a fresh startup-config, created from a plain factory-config
from v24.08, to be converted to an empty file.
Inspired by this fix, the same mitigation, albeit highyl unlikely,
has been applied to the v1.0 user shell type migration.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
When adding interfaces over NETCONF/RESTCONF, confd has a check to
ensure the peer end is skipped, since creating one end also create
the other.
This patch adds the corresponding skip when deleting a VETH pair.
Fixes#658
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Enable OSPF route metrics in RIB, only defined for OSPF
- Enable 'active' route flag for RIB, same as 'selected >' in FRR
- Enable 'last-updated' route field for RIB, used for uptime
- Augment route in RIB with 'installed' flag, same as 'FIB *' in FRR
The CLI "show ip route" command has been updated accordingly. The
classic Cisco style output has been kept instead of separating the
routes into Active and Backup, as discussed previously. Because
when inspecting large route sets you want to compare same prefix
vs distance/metric to understand why a certain route is selected.
admin@example:/> show ip route
PREFIX PREF NEXT-HOP PROTOCOL UPTIME
> 0.0.0.0/0 1/0 192.168.0.42 static 0h2m6s
* 192.168.122.1
0.0.0.0/0 5/0 192.168.122.1 static 0h2m6s
0.0.0.0/0 254/0 e1 static 0h2m6s
>* 169.254.0.0/16 0/0 e1 direct 0h2m6s
>* 192.168.0.0/24 1/0 192.168.122.1 static 0h2m6s
>* 192.168.122.0/24 0/0 e1 direct 0h2m12s
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
For consistency with the other IETF routing models, e.g., OSPF, let's
use the same model prefix for internal references.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Not the most obvious patch, but let me explain -- there will always be a
conflict betweem usability and "maintainability". The ietf-interfaces
yang model already declares /interfaces-state as deprecated, so we don't
really need to add a deviation 'not-supported', for usability, however,
it may be useful since the deviation helps cut out that tree completely.
While working with ietf-routing and our companion models, I found that
since it relies on ietf-interfaces, it also breaks the reload/reimport
of infix-routing while developing extensions/changes:
$ lint.sh -f tree ieee802-* iana-if-type@2023-01-26.yang \
ietf-interfaces@2018-02-20.yang \
infix-interfaces@2024-01-15.yang \
ietf-routing@2018-03-13.yang \
ietf-ipv4-unicast-routing@2018-03-13.yang \
ietf-ospf@2022-10-19.yang \
infix-routing@2024-09-22.yang
libyang err : Not found node "interfaces-state" in path. (Schema location "/ietf-routing:routing-state/interfaces/interface".)
libyang err : Target of leafref "interface" cannot be referenced because it is disabled. (Schema location "/ietf-routing:routing-state/interfaces/interface".)
YANGLINT[E]: Parsing schema module "ietf-routing@2018-03-13.yang" failed.
The only way to change/update models for a given build is to either, a)
surgically remove offending models from output/target/, then reinstall
all dependencies and hope it works better, or b) rebuild from distclean.
In most cases you end up with alternative b).
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Straighten out formatting issues in ospfd.conf (debug)
- Simplify and reduce code duplication
- Avoid 'restart zebra' errors in runlevel S
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch changes the way Infix DHCP and ZerocConf clients set their
routes in the system. Instead of setting them directly in the kernel
we ask FRR staticd to set them for us.
The reason for this change is to be able to override routes from these
protocols with locally set static routes. The routes are now set with
a distance of 5 and 254, respectively, while static routes by default
have a distance of 1. In contrast, kernel routes are always treated
by Frr as distance 0, i.e., they are preferred over static routes.
Finally, this patch drops the use of Linux legacy interface aliases, or
colon interfaces, in an effort to reduce confusion for end users. This
may give some odd results if using older tools like ifconfig, so we
recommend using 'show interfaces' or 'ipb a' instead.
Fixes#640
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
With the redesign of the operational rib routes, using vtysh 'show ip route'
instead of the kernel 'ip route' as source, we no longer need the infix source
protocol.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Since /etc is not retained across reboots, the sysrepo startup datastore
is not used to bootstrap the Infix. Instead, /cfg/startup-config.cfg is
used and loaded directly to the running datastore.
For some use-cases when operating directly on sysrepo this causes a lot
of confusion because startup == factory ds until any user calls the CLI
command `copy running-config startup-confg`.
This patch fixes this initial "glitch" by loading the starup datastore
at boot on successful loading of startup-config to unning.
To prevent any unintentional "auto-save" of, e.g., failure-config to
startup-config, we make confd aware of this "sync" operation during
bootstap.
Fixes#625
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Remove duplicate logs due to logger logging also to stderr
- Fix coding style in new test-override-startup code path
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch allows a user to specify a specific 169.254/16 address that
the zeroconf client starts with when probing for a free address. If the
probe fails it falls back to its default algorithm.
Fixes#628
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Today Infix only support OSPFv2 and Static routes, this hides all other
protocols in the CLI and makes it clearar about what we support in the YANG
model.
In 0edc2d5 and afbe5ca, just prior to v24.06.0-rc1, support for deleting
containers in the background was added. However, this also broke support
for upgrading containers.
In afbe5ca the start script for containers was renamed from NAME.sh to
S01-NAME.sh, but the container wrapper script's upgrade command was not
updated. Neither was the cleanup and post-hook callbacks in confd! So
when a container had been added to the system, the cleanup callback just
simply deleted the script, preventing it from being recreated at ugprade
This patch fixes the container identification code and also refactors
the execd code to ensure that kill scripts (for deleting in background)
and start scripts are run in the proper order *and* ensuring that execd
also does not accidentally remove the container start script.
Some cosmetic changes to the output at upgrade have also been added.
Fixes#623
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
To prevent the kernel from setting a random mac address on new bridges,
before we have added any bridge ports, we create bridges using the:
1. Custom mac address from the configuration (phys-address)
2. System base mac from /run/system.json
3. None, if there is no base mac address in system.json, e.g. r2s
Fixes#357
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Prior to this commit, querier multicast changes such as query-interval
where not applied to an existing multicast interface. The new initctl
touch makes finit send a sighup to mcd which causes it to re-load its
configuration files.
Signed-off-by: Richard Alpe <richard@bit42.se>
The srx_get_str() function may return NULL, which goes unchecked in
both fxlate() and sxlate(), as well as the calls to free().
Found by Coverity Scan
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This intoduce a new sysrepo plugin to handle a new YANG
model 'infix-test'. Today only contains the actions.
This is required to run tests on infix using infamy.
This is a part of #561
Signed-off-by: Mattias Walström <lazzer@gmail.com>
The LOG_SECURITY facility was set wrong (1 << 13) instead of (13 << 3), see
https://github.com/kernelkit/sysklogd/blob/0fc6656/src/syslog.h#L120 for
details. This caused all audit log messages to be logged in LOG_USER.
Also, rename LOG_SECURITY -> LOG_AUDIT and log macro SECURITY() -> AUDIT()
to match RFC5424 terminology.
Similar fix to sysrepo, LOG_AUDIT facility instead of daemon + WARNING.
Additionally, drop the leading [severity] prefix to sysrepo logs. Only
needed when logging to stdout.
Follow-up to issue #521
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
LOG_DAEMON is a facility not an option. Replace with NDELAY option and
set facility properly in call to openlog() instead.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The backported patches to sysklogd now support the RFC facilities
natively, so we can focus on local facilities (and 'all').
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Add a must expression to limit invalid configurations.
Not belonging to VLAN when added to a multicast-filter in
that VLAN. Make sure multicast snooping is enabled when
using multicast filters.
This fixes#587
Signed-off-by: Mattias Walström <lazzer@gmail.com>
Mattias Walström