RSSI is a vendor-specific relative index (0-255), while dBm is an
absolute power measurement. Since we report dBm values from iw,
rename the leaf to signal-strength for accuracy.
Also, add a check() function with a user-friendly reminder if the forget
to include the model prefix in the URL.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The networking guide has grown out of control for quite some time, it is
time to split it up into multiple files. This will hopefully also make
it a bit more accessible to users.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Add missing SVG For dhcpv6 example
- Fix link to static routes in WireGuard doc
- Add WireGuard to a new VPN sub-section in nav bar
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Replace BusyBox udhcpc6 with OpenWrt's odhcp6c for improved DHCPv6
functionality and better integration with Router Advertisements (RA).
The primary motivation is support for a common ISP deployment scenario
where IPv6 addresses are assigned via SLAAC (from Router Advertisements)
and DHCPv6 is used in stateless/information-only mode to provide DNS
servers and other configuration options. This hybrid RA+DHCPv6 setup is
standard practice for many ISPs but was not supported by udhcpc6, which
treats RA and DHCPv6 as separate, non-integrated mechanisms.
Additional benefits of odhcp6c:
- Better IPv6 Prefix Delegation (IA-PD) support with proper handling
of delegated prefix lifetimes and renewal
- Native integration of RA-provided configuration (DNS servers, routes,
addresses) with DHCPv6-provided options
- Support for stateless DHCPv6 via information-only mode
To verify stateless DHCPv6 integration with SLAAC addresses - the ISP
scenario that motivated this migration, a new test case has been added.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Almost full support for WireGuard
admin@server:/> show interface wg0
name : wg0
type : wireguard
index : 10
mtu : 1420
operational status : up
ipv4 addresses : 10.0.0.1/24 (static)
ipv6 addresses : fd00::1/64 (static)
peers : 2
Peer 1:
public key : ROaZyvJc5DzA2XUAAeTj2YlwDsy2w0lr3t+rWj2imAk=
status : UP
endpoint : 192.168.10.2:51821
latest handshake : 2025-12-09T22:51:38+00:00
transfer tx : 1412 bytes
transfer rx : 1324 bytes
Peer 2:
public key : Om9CPLYdK3l93GauKrq5WXo/gbcD+1CeqFpobRLLkB4=
status : UP
endpoint : 2001:db8:3c4d:20::2:51822
latest handshake : 2025-12-09T22:51:38+00:00
transfer tx : 1812 bytes
transfer rx : 428 bytes
in-octets : 1752
out-octets : 3224
admin@server:/>
This update got pretty messy, since libyang had some
breaking changes. And unfortunatly rousette, libyang-cpp
and sysrepo-cpp has not made any new release yet.
We previously run a draft version of a lot of YANG models,
netconf-server,ssh-server and mode. Now they are released
with minor changes.
infix-meta is an exception, here we had to remove the obsolete
marker of the node and value, since this is no longer allowed in
libyang.
Joachim Wiberg