- Sync defconfig with aarch64
- Sync linux_defconfig with aarch64
- ethtool w/ netlink not supported yet for the StarFice dwmac
- note, waaay too many unused drivers still
- Add aux/cfg/var partitions to sdcard, no rauc support yet
- Add factory-password-hash to device tree
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This change builds on top of the earlier work to bootstrap Infix YANG
modules at build time. Adding a step at the end of post-build.sh to
call the yangdoc tool. The resulting yangdoc.html is a stand-alone HTML
file of (almost) all YANG nodes. Almost because some top-level nodes
are unused by Infix atm. and have been filtered out for readability.
Fixes#432
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Sync after `make update-defconfig`:
- avahi selected by mdns-alias package (all)
- iptables and ca-certs selected by other packages (r2s)
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Add sshd 'UsePAM yes'
- Buildroot automatically adds and enables:
- /etc/pam.d/ with authentication for login, sshd, and sudo
- PAM support in BusyBox login
Also, prepare for adding RADIUS authentication support to ietf-system
the only tricky part is testing against a RADIUS server.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Buildroot's default ATF version changed from 2.9 to 2.10 when we
upgraded to 24.02.x. This meant that our patches were not applied,
which broke the build.
Take a conservative approach for now, and just pin the ATF version to
the known-good 2.9 series.
During the addition of multi-key support to RAUC and U-Boot, the
bootloader defconfig for CN9130 CRB was overlooked, which meant that
the Infix specific U-Boot hooks never ran, thereby ultimately breaking
the build.
Restore the required options to build in the dev-key by default.
Relocate the default landing page from the rootfs overlay to a package
so that customer repos can override it.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The massive-parallel build change added recently is a bit shaky still,
so while we stabilze that, we revert it and also take the oppportunity
to tag the new build server.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Today, only one certificate is shipped with infix, it is
selectable in menuconfig. It is also possible to add extra
certificates, useful when using infix as a submodule.
The Finit @console construct detects what your actual serial console is
by looking it up in /sys/class/tty/console/active. This to avoid any
weird problems that might occur when using /dev/console.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Converting to gunicorn, which is the recommended production server for
Flask apps, means app main() function is no longer called at startup, so
we have to factor out the mDNS CNAME functionality for infix.local and
network.local to a separate app.
We take this opportunity to collapse the structure, move non-class
methods to __init.py__, and rename the AvahiAlias class. A prototype
for replacing the overhead of mdns-alias with a C daemon is in its
early stages.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Advertises the build-time $hostname.local as a CNAME to the A and
AAAA records already advertised by Avahi
- Advertises a special network.local CNAME and provides a fastcgi
service on unix:/tmp/netbrowse.sock for browsing mDNS services
This commit also activates netbrowse by default with nginx listeing
to port 80 on IPv4 and IPv6 /browse by default but also / if called
with server name network.local.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
With Classic builds out of the way we can move everything back to common
again to simplify and reduce our collective cognitive overhead a bit.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The Classic builds served for a while as an introduction to classic
embedded systems, with a user managed read-writable /etc. Today we
decided to firmly take the plunge into the future with NETCONF and
focus on our core platforms aarch64 and x86_64 (for Qemu).
The reasons are several: reduce overhead, simplify build and release
work, as well as manual testing, since Classic builds do not have any
automated regression testing.
The Classic builds may be resurrected later in a dedicated project.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This is an example of how to create a package that downloads an OCI
archive and installs it to /lib/oci
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Sending SIGTERM to conmon is not a safe shutdown of a podman container.
To handle gracefully handle shutdown, restarting and provide an orderly
start of dependencies, we use the Finit sysv trick via container script
wrapper to call 'podman stop foo'.
However, since podman does not support syslog as output for containers
we employ an old FIFO trick with another program, k8s-logger, to allow
logs to reach syslog. Please note that k8s-logger must have properly
started before we call `podman start` -- this makes us fully dependent
on the 'container' wrapper script. Hence the documentation update.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Since the Nanopi R2S does not have a VPD, we use this mechanism to set
the default admin password. Without one, Infix will refuse to generate
the factory- and failure-config files, and thus refuse to start.
On custom boards in production we have VPD in ONIE format that contains
a per-device unique SHA256 hashed admin user password.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Loss of BusyBox "show others", uboot-tools, and e2fsprogs, are likely
due to resolved dependencies from other packages. E.g., Frr requires
bash.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Support for this is based on the upstream Buildroot R2S defconfig and
the myLinux extensions and stripped-down kernel defconfig. For more
information about the Nanopi R2S, see the FriendlyELC wiki at:
https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R2S
Please note, due to the lack of a VPD on the board, and some very poor
devicetree skills by yours truly, Infix currently refuse to boot on this
board. An in-devicetree factory-password-hash node has to be added, and
will be done soon.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Install the sudo command, and let all members of the "wheel" group run
any command as the superuser.
This ensures that administrators have full access to the system,
primarily for troubleshooting, diagnostics, and remote scripting
purposes.
Better than Busybox top, and can attach strace to services. So very
useful for debugging and monitoring a system.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Joachim Wiberg