The sysrepocfg tool does not set up nacm based on $USER, and we now have
the shell 'copy' tool which does. So drop 'cfg' and while we're at it
we also drop the 'edit' alias.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Replace BusyBox udhcpc6 with OpenWrt's odhcp6c for improved DHCPv6
functionality and better integration with Router Advertisements (RA).
The primary motivation is support for a common ISP deployment scenario
where IPv6 addresses are assigned via SLAAC (from Router Advertisements)
and DHCPv6 is used in stateless/information-only mode to provide DNS
servers and other configuration options. This hybrid RA+DHCPv6 setup is
standard practice for many ISPs but was not supported by udhcpc6, which
treats RA and DHCPv6 as separate, non-integrated mechanisms.
Additional benefits of odhcp6c:
- Better IPv6 Prefix Delegation (IA-PD) support with proper handling
of delegated prefix lifetimes and renewal
- Native integration of RA-provided configuration (DNS servers, routes,
addresses) with DHCPv6-provided options
- Support for stateless DHCPv6 via information-only mode
To verify stateless DHCPv6 integration with SLAAC addresses - the ISP
scenario that motivated this migration, a new test case has been added.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Example usage:
./src/statd/python/yanger/yanger -p wifi0 -x "ixll -A ssh enp195s0f0 sudo" ietf-hardware | ./board/common/rootfs/usr/libexec/infix/wifi-channel-map.py
Show the congestion in the 2.4 band.
Signed-off-by: Mattias Walström <lazzer@gmail.com>
* Add support for AP (list connected stations)
* Add scan-mode (Scan without create a fully configured station)
Signed-off-by: Mattias Walström <lazzer@gmail.com>
Finit is capable of setting up all basic file systems, even /run but
Infix relies on it allowing executing scripts (dagger and container)
so leave that for now.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The cfg.ext4 disk image was created but not formatted because mkfs.ext4
wasn't found. As sbin is not in PATH for an unprivileged user in
Debian.
This caused the VM boot to fail with "No persistent storage found for /cfg".
Signed-off-by: Richard Alpe <richard@bit42.se>
Add resource-limit and resource-usage containers to YANG model. Podman,
and later conmon, enforce CPU and memory limits in a delegated cgroupsv2
hierarchy managed by Finit.
Resource usage is queried from 'podman inspect', which has more nodes
than what is currently possible to limit.
Requires Finit 4.15, or later.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Previously, post-image.sh was able to create QEMU images from an
existing release tarball. This was useful when you wanted to test a
new bootloader build without having to wait for a full Infix build.
Restore this capability by adding a separate image target for it, and
then allow image-itb-qcow to source its input images from that instead
of a locally build squash+aux.
Limit support to x86, like we do on the "official" appliances on the
marketplace. Aarch64 has never really been used AFAIK.
Avoid the os-release import, since all that info is not important now
that these appliance files are only for development scenarios. In all
other cases, the official one, based on a proper release, should be
used.
We have not installed .dtb:s to $O/images/ for quite some time, and
nobody cared. That goes to show that this is not really used.
The image is still useful at times, so if it needed in the future,
then we can resurrect it from the logs and refactor it to an image
package.
Add a generic image target to build aux.ext4, which can be used both
when creating target-specific SD-card images, and when creating
regular disk images.
While we're here, make sure that we don't need a RAUC bundle in order
to generate aux.ext4 (which mkrauc-status.sh did). This saves us time
on _every_ incremental build.
Rather than using the creation of a signed image as a proxy for
whether the trusted keys should be installed RAUC/U-Boot's trust
stores, use the dedicated option.
Validate keys in gen_hostkey() before passing empty keys to shell scripts,
preventing:
Nov 04 2024 10:54:25 confd[2697]: SSH key (genkey) does not exist, generating...
Nov 04 2024 10:54:25 confd[2697]: writing RSA key
Nov 04 2024 10:54:26 confd[2697]: do_convert_from_pkcs8: /tmp/tmp.FH1Hr1 is not a recognised public key format
Also, fix base64 content formatting with proper 64-character line wrapping
using printf+fold instead of echo.
Use PKCS#1 RSA format for public keys as required by netopeer2-server, while
keeping PKCS#8 format for private keys. Use proper ssh-keygen format flag
(PKCS8) for correct conversion.
Fixes#1289
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Simplify fallback MAC detection to return lowest valid MAC address.
This is the easiest to document and explain to end users.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Set LANG=C.UTF-8 in finit.conf for system-wide coverage, in profile.d
for login shells, and in bash.bashrc for interactive shells to ensure
comprehensive Unicode support across all user interactions.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This allows us to gather better product information in /run/system.json
also for x86 based systems. For Qemu x86_64 systems the 'product-name'
changes from 'VM' to 'Standard PC (i440FX + PIIX, 1996)'.
Also, add new 'product-version' field for, e.g., board revisions, and add
missing 'serial-number' value for systems like Rasperry Pi that inject it
in the device tree.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Validate that DHCP options were requested in the parameter request
list before applying them. This prevents malicious or misconfigured
DHCP servers from forcing unwanted configuration changes.
Validates: hostname (12), DNS (6), domain (15), search (119),
router (3), static routes (121), and NTP (42).
Fail-safe behavior: rejects options if config file unavailable.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Resolve race condition between DHCP and configured hostname by introducing
priority-based hostname management using /etc/hostname.d/ directory pattern.
Priority order (highest wins):
90-dhcp-<iface> - DHCP assigned hostname
50-configured - YANG /system/hostname config
10-default - Bootstrap/factory default
The new /usr/libexec/infix/hostname helper reads all sources and applies the
highest priority hostname. It exits early if hostname unchanged, preventing
unnecessary service restarts.
Fixes#1112
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
After some discussion we agreed that this operation is the domain of
confd (or dagger) and any DHCP client should not mess with the admin
state of the interface it runs on.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Basic DHCPv6 support as a per-interface ipv6 setting, not in line with
the IETF YANG model, which has this as a root container.
Note, this also fixes DHCPv4 option inference after the relocation of
/dhcp-client to /interfaces, in 764bd8e.
Fixes#1110
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Release tarballs waste ~131MB per architecture by including both
rootfs.itb and rootfs.squashfs, even though rootfs.itb already
contains the squashfs (itb = 4096-byte header + squashfs).
This change removes rootfs.squashfs from releases and provides two
solutions for users who need it:
1. utils/extract-squashfs.sh - Full-featured utility for extracting
squashfs from release tarballs or .itb files. Includes validation
and helpful error messages.
2. board/common/qemu/qemu.sh - Auto-extraction support. When running
in initrd mode, automatically extracts rootfs.squashfs from
rootfs.itb if missing. Zero user impact - ./qemu.sh just works!
Space savings: ~262MB per release (2 architectures × 131MB)
Fixes#858
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Check if partition/LABEL is available before trying to run tune2fs and
mount commands on it. This change masks the kernel output:
LABEL=var: Can't lookup blockdev
commne when running `make run` on x86_64 builds.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
In 45efa94 we introduced new mount options for the: 'aux', 'cfg', and
'var' partitions. To save boot time, we also disabled the periodic fsck
check, which does not affect journal replay or other Ext4 safety or
integrity checks. The latter involved calling tune2fs at runtime, but
this caused the following to appear for the 'aux' partition, which is a
reduced ext4 for systems that need to change U-Boot settings, e.g., to
set MAC address on systems without a VPD.
EXT4-fs: Mount option(s) incompatible with ext2
Note, this is a "bogus" warning, setting the fstypt to ext2 in fstab is
not the way around this one. That's been tried.
To make matters worse, the new mount option(s), e.g., 'commit=30', gave
us another set of warnings from the kernel. This was due to the fstype
being 'auto', so the kernel objected to options not being applicable to
every filesystem it tried before ending up with extfs:
squashfs: Unknown parameter 'commit'
vfat: Unknown parameter 'commit'
exfat: Unknown parameter 'commit'
fuseblk: Unknown parameter 'commit'
btrfs: Unknown parameter 'errors'
This commit explicitly sets cfg and var to ext4, leaving mnt as auto, we
also check before calling tune2fs that the partition/disk image is ext4.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Reduce /var image size to 128M (resized at first boot anyway) and tune
mke2fs options for faster mounting. Set ext4 'uninit_bg' feature and
use '-m 0 -i 4096' extraargs in genimage to optimize filesystem creation
and reduce overhead. The genimage tool has several tweaks enabled by
default already, the 'uninit_bg' feature speeds up the time to check
the file system.
Disable periodic fsck with tune2fs at boot while keeping safety checks
intact. Adjust mount options in fstab to reduce journal syncs and
improve boot time.
Fix severe performance regression in find_partition_by_label() that was
calling sgdisk on every block device including virtual devices (ram, loop,
dm-mapper). This caused boot delays of up to 24 seconds on systems with
many block devices. Now skip virtual devices that don't have GPT tables,
reducing the delay to ~2 seconds.
Also clean up is_mmc() function to use cached result.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The xPi's usually don't have a VPD so the chassis mac-address probed at
boot is usually null in /run/system.json. This commit adds a fallbkack
mechanism to populate this field so it can be used for unique hostnames
even on these boards.
Ths ietf-hardware.yang model does not have a notion of physical address,
so we augment one tht is generic enought to be used for other hardware
components than Ethernet, similar to what ietf-interfaces.yang use.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit consolidates all BSP support files into the Buildroot standard
board/ directory. The concept of selectable boards in menuconfig remains
as-is but now lives in board/ instead.
Drop support for board-specific post-build.sh scripts, not needed atm. and
we should really use Buildroot _POST_INSTALL_HOOKS in the board .mk files
instead.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Joachim Wiberg