The sysrepocfg tool does not set up nacm based on $USER, and we now have
the shell 'copy' tool which does. So drop 'cfg' and while we're at it
we also drop the 'edit' alias.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The wi-fi architecture in infix require udev to run and remove the kernel automatic wlan-interface
this. Unclear reason, but it seems that udev sometimes miss the add event.
Verified with latest Finit 4.15 that reboot after resize works.
Added a comment to the board-specific .mk file about the broken
WDT on the RK3328 SoC, or rather the NanoPi R2S board.
Fixes#1292
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Board probing cannot copy board specific files to /usr (read-only), so
let's share this script with all other aarch64 boards.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Replace BusyBox udhcpc6 with OpenWrt's odhcp6c for improved DHCPv6
functionality and better integration with Router Advertisements (RA).
The primary motivation is support for a common ISP deployment scenario
where IPv6 addresses are assigned via SLAAC (from Router Advertisements)
and DHCPv6 is used in stateless/information-only mode to provide DNS
servers and other configuration options. This hybrid RA+DHCPv6 setup is
standard practice for many ISPs but was not supported by udhcpc6, which
treats RA and DHCPv6 as separate, non-integrated mechanisms.
Additional benefits of odhcp6c:
- Better IPv6 Prefix Delegation (IA-PD) support with proper handling
of delegated prefix lifetimes and renewal
- Native integration of RA-provided configuration (DNS servers, routes,
addresses) with DHCPv6-provided options
- Support for stateless DHCPv6 via information-only mode
To verify stateless DHCPv6 integration with SLAAC addresses - the ISP
scenario that motivated this migration, a new test case has been added.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Almost full support for WireGuard
admin@server:/> show interface wg0
name : wg0
type : wireguard
index : 10
mtu : 1420
operational status : up
ipv4 addresses : 10.0.0.1/24 (static)
ipv6 addresses : fd00::1/64 (static)
peers : 2
Peer 1:
public key : ROaZyvJc5DzA2XUAAeTj2YlwDsy2w0lr3t+rWj2imAk=
status : UP
endpoint : 192.168.10.2:51821
latest handshake : 2025-12-09T22:51:38+00:00
transfer tx : 1412 bytes
transfer rx : 1324 bytes
Peer 2:
public key : Om9CPLYdK3l93GauKrq5WXo/gbcD+1CeqFpobRLLkB4=
status : UP
endpoint : 2001:db8:3c4d:20::2:51822
latest handshake : 2025-12-09T22:51:38+00:00
transfer tx : 1812 bytes
transfer rx : 428 bytes
in-octets : 1752
out-octets : 3224
admin@server:/>
Example usage:
./src/statd/python/yanger/yanger -p wifi0 -x "ixll -A ssh enp195s0f0 sudo" ietf-hardware | ./board/common/rootfs/usr/libexec/infix/wifi-channel-map.py
Show the congestion in the 2.4 band.
Signed-off-by: Mattias Walström <lazzer@gmail.com>
* Add support for AP (list connected stations)
* Add scan-mode (Scan without create a fully configured station)
Signed-off-by: Mattias Walström <lazzer@gmail.com>
Finit is capable of setting up all basic file systems, even /run but
Infix relies on it allowing executing scripts (dagger and container)
so leave that for now.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The cfg.ext4 disk image was created but not formatted because mkfs.ext4
wasn't found. As sbin is not in PATH for an unprivileged user in
Debian.
This caused the VM boot to fail with "No persistent storage found for /cfg".
Signed-off-by: Richard Alpe <richard@bit42.se>
Actually disable iitod on Styx DCP-SC-28p to work around #670, this
prohibits software control of LEDs, leaving the default HW control,
which has proven more stable on this platform.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Add resource-limit and resource-usage containers to YANG model. Podman,
and later conmon, enforce CPU and memory limits in a delegated cgroupsv2
hierarchy managed by Finit.
Resource usage is queried from 'podman inspect', which has more nodes
than what is currently possible to limit.
Requires Finit 4.15, or later.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
We previously run a draft version of a lot of YANG models,
netconf-server,ssh-server and mode. Now they are released
with minor changes.
infix-meta is an exception, here we had to remove the obsolete
marker of the node and value, since this is no longer allowed in
libyang.
On platforms based on CN913{0,1,2}, collect all ECC related counters
so that we know if any correctable errors have been encountered since
the most recent boot.
Rev. A has a FLASH that Linux reconfigures to 4B-addressing, but must
be in 3B-addressing when accessed by the BootROM. Since it has no
reset input, this would not work on warm resets. Linux has a
workaround for this issue for the common case of a controlled reboot,
which this change enables on those boards (which are admittedly few
and far between, but still useful as testing vehicles).
(This won't take effect until Finit is updated to at least 4.15, which
switches over from watchdog- to reboot(2)- based reboot, by default)
Turn on OOPS-to-panic, soft/hard lockup panic, hung-task panic, and
extra workqueue watchdog reporting. This makes latent stalls visible
instead of silently freezing, improving diagnosis of issues like the
recent resource-pressure lockup.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Previously, post-image.sh was able to create QEMU images from an
existing release tarball. This was useful when you wanted to test a
new bootloader build without having to wait for a full Infix build.
Restore this capability by adding a separate image target for it, and
then allow image-itb-qcow to source its input images from that instead
of a locally build squash+aux.
Limit support to x86, like we do on the "official" appliances on the
marketplace. Aarch64 has never really been used AFAIK.
Avoid the os-release import, since all that info is not important now
that these appliance files are only for development scenarios. In all
other cases, the official one, based on a proper release, should be
used.
We have not installed .dtb:s to $O/images/ for quite some time, and
nobody cared. That goes to show that this is not really used.
The image is still useful at times, so if it needed in the future,
then we can resurrect it from the logs and refactor it to an image
package.
Add a generic image target to build aux.ext4, which can be used both
when creating target-specific SD-card images, and when creating
regular disk images.
While we're here, make sure that we don't need a RAUC bundle in order
to generate aux.ext4 (which mkrauc-status.sh did). This saves us time
on _every_ incremental build.
Joachim Wiberg