This affects CLI command such as:
> show interface name p1
Prior to this patch, this took roughly ~1200ms on hardware and with
the path it takes roughly 50ms.
Signed-off-by: Richard Alpe <richard@bit42.se>
Add a python3 script "ethtool-to-json" which runs ethtool locally and
converts output which we are interested in into json. The script
simply json encodes the output from ethtool, i.e. it does not print it
in YANG format. This might be a good idea to change in the future if
the C code has to do a lot of ethtool to YANG translations.
The json output of the ethtool-to-json script is then parsed in C
using libjansson, translated to YANG and added to the operational
datastore.
Signed-off-by: Richard Alpe <richard@bit42.se>
Add counters from Ethtool groups to the operational datastore. The
mapping from Linux / Ethtool to YANG is described in the included
document eth-counters.md.
Signed-off-by: Richard Alpe <richard@bit42.se>
This implements the new model infix-if-vlan.
The new CLI is:
root@infix-00-00-00:/config/interfaces/interface/vlan10/> set vlan id 10 lower-layer-if eth0
with an possible extra option for tag-type, default tag-type is c-vlan.
Pretty print all Ethernet frame statistics from the operational
datastore. Only in the detailed interface view.
Signed-off-by: Richard Alpe <richard@bit42.se>
The template and scripts for generating per-device factory-config have
been spread out across the repo. This is an attempt to gather all the
pieces to a single location for better overview.
Parts of factory-config will be reused for the new fail secure mode, in
the file failure-config. The beginnings of which are in this commit.
Other changes:
- cfg-bootstrap and confd-bootstrap have been collapsed into one
- let gen-hostname + gen-interfaces save to /cfg instead of /etc,
we've moved the /etc directory to read-only storage in /usr/share
- delay start of bootstrap and sysrepo-plugind after syslogd barrier
- set 'norestart' when loading startup-confg and failure-config,
no point in retrying if that fails, just go to error immediately
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This allows us to show empty values easier, while not affecting the
if statements.
This allows for a greater flexibility in which values are shown and
not. For example, we want to show empty columns for data that the
user adds/removes, such as IP addresses.
...
ipv4 addresses :
...
However, we don't want to show empty columns for information that
should never exist for a particular interface type.
Signed-off-by: Richard Alpe <richard@bit42.se>
The old version (bash) where slow and cluttered. This version is much
faster and easier to read / maintain.
Signed-off-by: Richard Alpe <richard@bit42.se>
The old assumption was that only virtual links would have specific
"linkinfo" data. However, somewhere between 5.19 and 6.1, DSA ports
gained the ability to report its "conduit" interface via the
"linkinfo" attribute. That's great, but unfortunately it broke our
heuristic assumptions.
The new assumption is that only physical ports will report a
"parentbus" attribute. Let's see how long that will last :)
Bootstrap and daemon-specific helper scripts, sometimes known as foot
guns, should not be in $PATH.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The script resides with confd and sets up our system for confd, this
should make it easier to rememeber where it's located.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
On some system, certain interfaces are not usable by an end-user. The
canonical example of this is the ethernet MAC connected to a switch,
i.e. the DSA port.
Avoid having these be picked up in the generated factory-config, which
would be confusing to a user, by classifying them as "internal" ports
to be ignored by confd and friends.
Add source, such as "ethernet" to the show ietf interfaces command.
This is translated from the somewhat obscure ietf type, such as
iana-if-type:ethernetCsmacd => ethernet
Signed-off-by: Richard Alpe <richard@bit42.se>
Replace the old "ip" output with data from the sysrepo operational
datastore. This data is piped through the new json-cfg-pretty script,
which formats the data in a nice human readable way.
Signed-off-by: Richard Alpe <richard@bit42.se>
This patch adds a new infix-interface-type, derived from the IANA base
type, allowing us to limit the list of supported native interface types.
Basing on IANA interface type ensure compatibility with other models,
e.g., standard/ieee/published/802.3/ieee802-ethernet-interface.yang,
which attaches itself to all interfaces of type ianaift:ethernetCsmacd.
Tested with yanglint and in Infix using ieee802-ethernet-interface.yang,
the 'ethernet' container was properly attached to interfaces of type
infixift:ethernet.
Tab completion in the CLI now lists only the supported types.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch restricts the possible user shells to a subset of the list in
/etc/shells, which is generated by Buildroot. The default is 'false' to
prevent accidental shell access for non-admin role users.
The default shell for the admin user is now /bin/clish, which can be
further locked down before Infix v24.02 LTS.
In case of internal error the default fallback shell is now set to the
customizable LOGIN_SHELL, which currently is /bin/bash.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Add /bin/clish (symlink) to /etc/shells, as well as the traditional
/bin/{true,false} for completeness
- Validate shell string, with fallback to /bin/bash and /bin/sh
- Step infix-system revision, keeping old model in tree
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
To set up proper factory defaults in Infix we need to drop the default
/etc/sysrepo datastores, initialized at compile-time by Buildroot when
installing netopeer2. The pre-initialized datastores cannot be set up
with new {factory} data in any other way.
The system factory-config is constructed from two parts: static data and
generated data. The latter is:
- hostname (product name + the three last octets of the base MAC)
- interface defaults (depends on number of ports on the device) that
enable IPv6 link-local on all interfaces, and
- per-device unique SSH hostkey for remote NETCONF access, requires
openssl binary on target. Can maybe use openssh for this (TODO).
The hostkeys are saved in /cfg/factory.d/ to prevent them from being
regenerated on every boot.
The script gen-hostkeys and the update of 10-netconf-server.json are
inspired by the netopeer2 scripts merge_hostkey.sh and merge_config.sh,
which do just about the same thing for regular systems.
We bootstrap sysrepo early with all the required models, netopeer2 as
well as our own, by calling sysrepoctl with initial data for {factory}
and {startup} datastores. A local patch to sysrepo is used to allow it
to look for an /etc/factory-default.json instead of compile-time default
data, the patch allows us to have variable amount of objects in the init
data, e.g. number of interface objects.
A system startup-config is generated, if one is mising, from {running}.
We then drop the initial {running} datastore before starting the daemons
sysrepo-plugind and netopeer2-server so that they, and our plugins, are
ready when we load the system startup-config.
Some sanity checks and debug possibilities:
- Ensure /etc/sysrepo exists before copying factory-config
- Keep factory-default.json for debug
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Keys stored in system specific directory /var/run/sshd/$USER.keys
- Keys are regenerated on each corresponding reconfiguration event
- Deletion of key(s) or user remove all keys
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
On May 10, 2023, @troglobit wrote:
> Initial proposal for factory-config, based on example from RFC8341.
This gives the admin user the ability to configure the device over
NETCONF.
This patch adds a new user "admin" with the password "admin". The
password is hashed with sha512 ($6) as a hint to new users attempting
to change the password (avoid the weakest algorithms).
Signed-off-by: Richard Alpe <richard@bit42.se>
- Drop unused packages in NETCONF (default) mode
In the default build we will use the net tool instead of iupdown-ng,
p-net & Profeth will move to customer-specifc builds with another
licensing model.
- Split out NETCONF specific parts from board/common to board/netconf
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
