By default, Linux will map an IP packet's TOS field into skb->priority
when acting as a router. Unfortunately this is only globally
configurable (per network namespace), which leaves us with the
following dilemma:
If we keep reclassification enabled, then a setup like this...
vlan1 vlan2
\ /
br0
/ \
e1 e2
...would likely not work as expected because any priority information
from hardware, that might be mapped to skb->priority via vlan1's
ingress-qos-map, would then be replaced by the standard TOS-mapping on
the routing boundary.
On the other hand, if we disable reclassification, then we won't be
able to source priority information from the TOS field when no other
source is available, as is the case when the source interface is a
regular NIC.
Given that the primary use-case is to run on switchdev ports, we will
most likely always have priority information available from hardware,
which is why we opt to disable the reclassification.
If this ever becomes configurable per interface, then we could open up
the configuration to let users define the policy of which layer's
priority should take precedence.
Opportunistically look for interfaces with multiple transmit queues
and hardware support for the mqprio queuing discipline. For every
matching interface, set up mappings from kernel-internal packet
priorities, via traffic classes, to transmit queues such that as many
high priorities as possible are scheduled on separate queues.
This makes it easier to add more scripts without having to update the
finit config file, and it clarifies which of the scripts in
/libexec/infix only execute at boot.
This enables access to /restconf on port 443 over HTTP/1.1 and HTTP/2
via rousette when enabled.
Also, slight refactor to allow including /restconf and /netbrowse as
optional locations in the main servier directive.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
When interface naming switched to use 1-based indices instead of
0-based, the topology generation was overlooked thus breaking tests
against a `make run` instance.
Bring everything back in sync.
- Add sshd 'UsePAM yes'
- Buildroot automatically adds and enables:
- /etc/pam.d/ with authentication for login, sshd, and sudo
- PAM support in BusyBox login
Also, prepare for adding RADIUS authentication support to ietf-system
the only tricky part is testing against a RADIUS server.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Since we don't have any VPD defined on this board, supply a default
password hash via the device tree instead.
Also, specify the path to external USB port, so that Infix will pick
it up in ietf-hardware.
Provide a patched device tree that:
- Uses the correct phy-mode for eth2, allowing it to be probed
properly
- Wires up the interrupt signal to the GPIO expander, so that the SFP
cage's I/O lines can be configured as interrupts, rather than having
to poll them
Assume that the caller always want to create a new partition table,
even in scenarios where one already exists. This allows devices to be
reprovisioned with a newer image, for example.
Fixes#394
This is not a production target, so we choose the more developer
friendly option of allowing the boot process to be interrupted.
Also, remove the old update cruft and rely on Marvell's `bubt`
instead.
The BootROM wants the bootloader to be located on LBA1, which is not
ideal when using a GPT to describe the partition table.
Make sure the `bubt` command targets SPI by default.
This fixes a serious security regression introduced late in the v24.04
release cycle. The root cause is the placement of the shadow file in
the rootfs overlay, which causes any changes made by the Buildroot
setting BR2_TARGET_ENABLE_ROOT_LOGIN to be discarded/overwritten just
before creating the squashfs image.
The fix in this commit relocates all files from b4eb450 to the skeleton
in Infix, package/skeleton-init-finit/skeleton/etc, which is one of the
first packages to be installed when starting a build.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The dagger tool is a helper for scripts generated by confd and should
therefore be installed by confd instead of the rootfs overlay.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Relocate the default landing page from the rootfs overlay to a package
so that customer repos can override it.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
In order to make use of the DCB support in mv88e6xxx we also enable it
in the kernel config.
Fixes: 3a73ce3cfb ("kernel: Import EtherType based priority override support")
This patch helps silence kernel errors to console at boot. To fully
silence errors, enable emulated /var in your Qemu runs as well.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Free up 'operator' and 'staff' groups for NETCONF use
- Reserve 'backup' user and group for future auto-backup (Debian)
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The base mac address is used by bridges in Infix. This patch adds
support for extracting a base mac from the first interface "- 1",
e.g., if the mac address of e1 is 08:00:20:00:00:01, the base mac
will be 08:00:20:00:00:00.
This works with the Infamy test framework (Qeneth) and also with
the qemu script, included in this patch.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Today, only one certificate is shipped with infix, it is
selectable in menuconfig. It is also possible to add extra
certificates, useful when using infix as a submodule.
Even though dnsmasq only listened to requests from 127.0.0.1, port 53
was visible using nmap. We only use dnsmasq as a local resolver, so
we can safely change the config to bind to loopback instead, and at
the same time get less noise from nmap scans.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit adds a landing page, generated from the top README.md. It
is a temporary fix before adding a proper web ui.
Run ./gen.sh from the directory to update index.html using the template.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Relocate all nginx .conf files to board/common/rootfs/etc/nginx/ and
introduce available/*.conf with symlinks to enabled/*.conf
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
