Do not allow the topology matcher to setup a LAG where one link is
running at 10G while the other one runs at 1G, since the bond will
never use the 1G port as long as there the 10G link is up.
Verify connectivity from host to the second DUT via the first, over a
link aggregate. Both aggregate member links are connected to a TPMR
link breaker to hide link down from the DUTs.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Verify connectivity from host to the second DUT via the first, over a
link aggregate. The lag starts in static mode and then changes to an
LACP aggregate. This verifies not just basic aggregate functionality,
but also changing mode, which is quite tricky to get right.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Instead of encoding hex data in regular strings, using an 'id:' prefix,
or guessing based on pattern in C code, we have decided for a breaking
change in the DHCP client model.
This commit introduces string and hex values for client-id in the models
for both DHCP client and server. The *breaking* part of the changes are
strictly related to how a user pass binary data as colon-separated hex
digits. The dedicated leaf node `client-id` is now reserved for string
values and the generic `list option` can be used to input user defined
string or hex values. Even non-conformant client-id options can now be
encoded. All described in detail in infix-dhcp-client.yang
The server model has been updated to be able to send generic options in
hex format, and the static host lease matcher for client-id now require
a 'str' or 'hex' modifier.
Note: dnsmasq is RFC compliant and will not match non-conforming option
61 (client-id) even though the client can send such payload.
To increase test coverage, the server_host test has been updated to
check both string and hex client-id. Matching on hostname is already
covered by other test(s).
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
With support for dns resolver in place, the ietf-system output needs to
be complemented with additional data collected from both the dnsmasq and
openresolv subsystems.
System date taken from 'client3' in the Infix DHCP server-subnets test.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
For consistency with the new dhcp-server model, which has an option
value 'name', options are now referred to as id's or identifiers.
This means bumping the confd syntax version 1.3 -> 1.4 and adding a
migration script for existing dhcp-client configuration files.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
mDNS and LLDP tests should run independently to avoid interference.
Previously, mDNS tests were blocked due to LLDP's transmit interval
limitations. Moreover, mDNS operates at Layer 3, while LLDP operates
at Layer 2, making IP configuration unnecessary for LLDP tests.
Implemented logic to check if the system supports required services.
Logical edges with 'requires' fields are mapped only if physical edges
provide corresponding services. If not, the test is skipped.
This ensures that tests only run when the required services are available
in the test system configuration.
Fixes#654
On slow systems, we don't want test steps involving tools like scp or
ssh-keyscan to fail because the server had not come up yet.
Therefore, make sure that the server is ready to accept connections
before moving on to subsequent test steps.
Use CAPTIALIZED names for static data and collect them at the top.
Make a note about for future readers about why a test called
ssh_key_authentication suspiciously does not enable the SSH service :)
Break up the --test parameter into either:
--capture: Write system command output to a local directory for later
consumption by...
--replay: Which can replay a previous capture
Rename --wrap-commands => --cmd-prefix
This should be a non functional change. The idea is to use the topdoc
dir from 9pm when generating the test report.
Signed-off-by: Richard Alpe <richard@bit42.se>
Existing tests relied on manually captured system data from various
points in Infix's history, making them hard to extend as we add new
features.
Move to a new model where we:
To update a unit test:
1. Use Infamy tests to setup a DUT in a known state
2. Use yanger's wrapper mode to capture the system state needed to
produce operational data for a set of YANG models
3. Use cli-pretty to create the expected output for a set of show
commands
When running unit tests, we can then use the captured data to verify
that yanger and cli-pretty works as expected without the need for a
running Infix system - just like before. The difference is that it is
now much easier to capture a new snapshot when the system evolves.
Ensure that all flavors of GRE tunnels can be configured. In addition
to the increased test coverage, it will also be useful as a basis for
collecting representative system state for CLI testing.
Ensure that VLANs can be configured on VLAN filtering bridges. In
addition to the increased test coverage, it will also be useful as a
basis for collecting representative system state for CLI testing.
This is just a first step to add VXLAN tunnels, much more remains.
Implemented right now is as GRE, local, remote and a VNI.
Also refactor gre_basic and gre_bridged to generic tunnel tests,
the same test now tests VXLAN as well.
The suite can also contain meta data for the test specification,
One meta data that is implemented is title, which is used when the
same test code is used twice with parameters.
Also if a test case should not be present in the test specification
for some case. You can add specification: False as meta data.
The yanger source grown significantly, code is disorganized, the
namespace is all over the place, etc.
Take a stab at remedying the situation by splitting out the individual
YANG models in separate Python modules, starting with ietf-system.
Tobias Waldekranz