Needed for devices that share a lot of properties with an ethernet
device but doesn't support "ethtool" and such. An example is TAP
interfaces.
Signed-off-by: Richard Alpe <richard@bit42.se>
Rely on the interface diff to figure out if any autoneg related config
has changed; if so, generate the resulting configuration based on the
current interface config.
- Remove loopback check, the model only allows ethernet config on
interfaces of type "ethernet".
- Split up the input validation of speed/duplex to give the user an
error message with as much specificity as possible.
- Validate that the configured speed/duplex is supported.
- Move the generated script to execute earlier to avoid unnecessary
link flapping.
- Use negative POSIX error codes, these are (or at least should be)
mapped to sysrepo errors in netdag_gen_iface.
Add the ability to configure interface speed, duplex and autoneg.
Initially this was pared with YANG model deviations that restricted
explicit interface speed and duplex when autoneg was enabled. But due
to conflicting default states in YANG, this code was dropped.
Signed-off-by: Richard Alpe <richard@bit42.se>
The DHCP client YANG model saw a lot of changes added in the 23.12
sprint, fortunately there was never an official release.
This commit bumps the model version for v24.01.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
For maximum flexibility we allow the user to full control over the DHCP
options the client requests. For this to work we must tell udhcpc to
not set any of its defaults behind the scenes, so we call it with '-o'.
This commit adds support for inferring these udhcpc default options in
NETCONF. So when enabling the DHCP client we now get the same set of
sane options as udhcpc otherwise hides from us.
Fixes#278, at least wrt. the lack of sent options. Allowing the client
script to set the hostname will be added in a later commit.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
No need to guard the hostname option in quotes, it must not contain
whitespace. If user configured more than one word, use first.
Fixes#283
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This let's users script infix devices without needing any special
NETCONF tools installed - ssh is enough. E.g. you can get the running
version with something like:
ssh INFIX-HOST sysrepocfg -X -fjson -d operational \
-x "/system-state/platform/os-release" | jq .
It also means that SCP works as expected, by default.
admin@infix-00-00-00:/config/> edit routing control-plane-protocol ietf-ospf:ospfv2 name default
set ospf area 0.0.0.1 area-type nssa-area
set ospf area 0.0.0.1 area-type stub-area
set ospf area 0.0.0.1 summary true
set ospf area 0.0.0.1 default-cost 100
A very limited part of the YANG model is implemented so far, basicly it is OSPFv2 with multiple areas and you can change timers
for the interfaces. Limited operational support.
admin@infix-00-00-00:/config/> edit routing control-plane-protocol ietf-ospf:ospfv2 name default
admin@infix-00-00-00:/config/routing/control-plane-protocol/ietf-ospf:ospfv2/name/default/> set ospf area 0.0.0.0 interface e0 enabled true
admin@infix-00-00-00:/config/routing/control-plane-protocol/ietf-ospf:ospfv2/name/default/> leave
This patch ensures that the DHCP client is not started until the
interface is up and running (link). If the interface goes down,
or loses link, the client is stopped and everything learned from
the server (address, routes, DNS/NTP servers, etc.) is remvoed.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit changes the DHCP options from plain flags to customizable
options with optional values. This works for most key:value options,
but not for the more complex ones, e.g. option 81. For this we have
dedicated handling to use `udhcpc -F fqdn` instad.
Additionally, the inference a default option list has been removed in
favor of a set of generic default options: router, dns, domain, address,
broadcast, ntpsrv, search, staticroutes, msstaticroutes.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
