Neither the Raspberry Pi 2B or the Microchip SAMA7G54-EK board have WiFi
hardware by default so drop WiFi, and GPS, support to allow for smaller
builds with only the bare essentials in kernel and system.
Minimal builds in general don't need WiFi or GPS either, so let's disable
them from all. This may become a central theme going forward, keeping
the minimal builds ... minimal.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The v2025.01 release supports the Microchip SamA7G5* eval kit(s), which
means we can enjoy the same patch level of U-Boot as other Infix boards
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Add board support for the BananaPi BPi-R64 router board, based on the
MediaTek MT7622 SoC and MT7531 Gigabit Ethernet switch.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
DNS does not allow CNAME records at an apex domain (e.g. kernelkit.org),
so GitHub Pages cannot reliably redirect kernelkit.github.io to it. A
www subdomain can carry a CNAME pointing directly to kernelkit.github.io,
giving GitHub full control over the mapping and making the redirect work.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This includes adding a netd-daemon since FRR has gone towards all
daemons should be configured from mgmtd using YANG, netd uses gRPC to
reconfigure in mgmtd
Signed-off-by: Enable grpc
This is a simple two port router board, with the same
WiFi chips as BPI-r3.
The bootloader shall be the same as the BPI-r3, the bootloader
now probes which of the two is booting by checking for the PHYS
that only exist on BPI-r3-mini.
Enable gpsd and override package defaults to integrate in Infix.
- Sync with rules disabled downstream in Debian project to prevent
clashes with common vendor/device ids used for other device types
- Start gpsd instance with '-n' to ensure /dev/shm is udpated for chrony
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
All build scripts use $BR2_ARCH to determine location of critical board files
and configuration. As per previous decisions, the BR2_ARCH variable controls
all naming in Infix and for consistency the defconfig files are also renamed.
This fixes the issue with missing DTB file(s) for the Raspberry Pi 2B.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Bump toolchain to match other build targets GCC 13 -> 14
- Drop post-build.sh to match other build targets
- Add features to arm_defconfig, all except containers
- Enable chck hashes
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Fix locations of packages to match 'make update-defconfig' order
- Fix defconfig syntax for watchdogd tempmon ...
- Enable check hashes on all defconfigs
- Add missing wireguard and wifi support to RiscV
- Rename dongle support for X86_64 build
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The RTL8169 firmware was specifically added for the Raspberry Pi Compute
Module 4 IoT Router Board Mini, it does not need to be part of defconfig.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- relocate src/show.py to src/bin/show/
- Refactor container() to use run_sysrepo() instead of rolling its own
- Replace sysrepocfg with copy which supports nacm
- Rename run_sysrepocfg() -> get_json()
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Previously the sys-cli group was for interactive shell access, but with
ever changing requirements this split has become necessary.
This commit introduces the 'sysrepo' group for low-level access to all
sysrepo commands, i.e., bootstrap only. For user-level shell access a
'klish' group is added which allows users to connect to the CLI. This
is now the only group users, including the default 'admin', are members
of, effectively making the new 'copy' tool the norm.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Replace BusyBox udhcpc6 with OpenWrt's odhcp6c for improved DHCPv6
functionality and better integration with Router Advertisements (RA).
The primary motivation is support for a common ISP deployment scenario
where IPv6 addresses are assigned via SLAAC (from Router Advertisements)
and DHCPv6 is used in stateless/information-only mode to provide DNS
servers and other configuration options. This hybrid RA+DHCPv6 setup is
standard practice for many ISPs but was not supported by udhcpc6, which
treats RA and DHCPv6 as separate, non-integrated mechanisms.
Additional benefits of odhcp6c:
- Better IPv6 Prefix Delegation (IA-PD) support with proper handling
of delegated prefix lifetimes and renewal
- Native integration of RA-provided configuration (DNS servers, routes,
addresses) with DHCPv6-provided options
- Support for stateless DHCPv6 via information-only mode
To verify stateless DHCPv6 integration with SLAAC addresses - the ISP
scenario that motivated this migration, a new test case has been added.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Almost full support for WireGuard
admin@server:/> show interface wg0
name : wg0
type : wireguard
index : 10
mtu : 1420
operational status : up
ipv4 addresses : 10.0.0.1/24 (static)
ipv6 addresses : fd00::1/64 (static)
peers : 2
Peer 1:
public key : ROaZyvJc5DzA2XUAAeTj2YlwDsy2w0lr3t+rWj2imAk=
status : UP
endpoint : 192.168.10.2:51821
latest handshake : 2025-12-09T22:51:38+00:00
transfer tx : 1412 bytes
transfer rx : 1324 bytes
Peer 2:
public key : Om9CPLYdK3l93GauKrq5WXo/gbcD+1CeqFpobRLLkB4=
status : UP
endpoint : 2001:db8:3c4d:20::2:51822
latest handshake : 2025-12-09T22:51:38+00:00
transfer tx : 1812 bytes
transfer rx : 428 bytes
in-octets : 1752
out-octets : 3224
admin@server:/>
After merging post-post-image, TRUSTED_KEYS must be set in order for
the keys to be injected into the U-Boot DTB, so we need to explicitly
enable it for all boards that use the generic secure boot scripts.
This was a stray config fragment used during development that was
accedentally included in the referenced commit.
Fixes: 0fe5964909 ("aarch64_qemu_boot: Restore build after removing post-image.sh")
