This update brings new support for editing cleartext-symmetric-keys with
the 'change' command. The cleartext-symmetric-key is of type binary and
its use differs between different key-formats.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Environment variables are stored in a separate .env file from the main
container script. The config SHA256 checksum only covered the script
file, so changes to env vars went undetected -- the container was not
recreated and kept running with stale values.
Include the env file contents in the config checksum calculation so that
any change to environment variables triggers a proper container restart.
Fixes#1313
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
All build scripts use $BR2_ARCH to determine location of critical board files
and configuration. As per previous decisions, the BR2_ARCH variable controls
all naming in Infix and for consistency the defconfig files are also renamed.
This fixes the issue with missing DTB file(s) for the Raspberry Pi 2B.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The RTL8169 firmware was specifically added for the Raspberry Pi Compute
Module 4 IoT Router Board Mini, it does not need to be part of defconfig.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
RSSI is a vendor-specific relative index (0-255), while dBm is an
absolute power measurement. Since we report dBm values from iw,
rename the leaf to signal-strength for accuracy.
The trick to starting the scanner mode is to have a dummy network that
cannot associate with anything.
Fixes#1193
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Was set to informational, and Zebra to debug, which is mostly useful for
developers when debugging the integration of Frr daemons.
Example of before this patch:
Nov 4 13:44:09 infix-6f-05-e1 finit[1]: staticd[4366], stopping, sending SIGTERM ...
Nov 4 13:44:09 infix-6f-05-e1 staticd[4366]: Terminating on signal
Nov 4 13:44:09 infix-6f-05-e1 zebra[4221]: [N5M5Y-J5BPG][EC 4043309121] Client 'static' (session id 0) encountered an error and is shutting down.
Nov 4 13:44:09 infix-6f-05-e1 zebra[4221]: [KQB7H-NPVW9] zebra/zebra_ptm.c:1333 failed to find process pid registration
Nov 4 13:44:09 infix-6f-05-e1 zebra[4221]: [JPSA8-5KYEA] client 26 disconnected 1 static routes removed from the rib
Nov 4 13:44:09 infix-6f-05-e1 zebra[4221]: [S929C-NZR3N] client 26 disconnected 0 static nhgs removed from the rib
Nov 4 13:44:09 infix-6f-05-e1 finit[1]: Starting staticd[5529]
Nov 4 13:44:09 infix-6f-05-e1 zebra[4221]: [V98V0-MTWPF] client 26 says hello and bids fair to announce only static routes vrf=0
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
We want the command to show the entire log file, but fast forward to and
tail at the end, handling any file rotations from syslogd.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Simplify USB device debugging by allowing USB core to always announce
details of every new USB device to syslog.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
When the shell is blocked on sleep, signal handlers don't execute until
the command completes. This caused the script to ignore SIGTERM at
shutdown, forcing Finit to wait and eventually SIGKILL it instead.
Fix by running sleep in the background and using wait, which is
interruptible by signals.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This reverts commit bf1eca0567.
This mess up order if having more than 1 phy, have not been
reproduce the error that got me to introduce this fix from
the beginning.
The sysrepocfg tool does not set up nacm based on $USER, and we now have
the shell 'copy' tool which does. So drop 'cfg' and while we're at it
we also drop the 'edit' alias.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The wi-fi architecture in infix require udev to run and remove the kernel automatic wlan-interface
this. Unclear reason, but it seems that udev sometimes miss the add event.
Verified with latest Finit 4.15 that reboot after resize works.
Added a comment to the board-specific .mk file about the broken
WDT on the RK3328 SoC, or rather the NanoPi R2S board.
Fixes#1292
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Board probing cannot copy board specific files to /usr (read-only), so
let's share this script with all other aarch64 boards.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Replace BusyBox udhcpc6 with OpenWrt's odhcp6c for improved DHCPv6
functionality and better integration with Router Advertisements (RA).
The primary motivation is support for a common ISP deployment scenario
where IPv6 addresses are assigned via SLAAC (from Router Advertisements)
and DHCPv6 is used in stateless/information-only mode to provide DNS
servers and other configuration options. This hybrid RA+DHCPv6 setup is
standard practice for many ISPs but was not supported by udhcpc6, which
treats RA and DHCPv6 as separate, non-integrated mechanisms.
Additional benefits of odhcp6c:
- Better IPv6 Prefix Delegation (IA-PD) support with proper handling
of delegated prefix lifetimes and renewal
- Native integration of RA-provided configuration (DNS servers, routes,
addresses) with DHCPv6-provided options
- Support for stateless DHCPv6 via information-only mode
To verify stateless DHCPv6 integration with SLAAC addresses - the ISP
scenario that motivated this migration, a new test case has been added.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Almost full support for WireGuard
admin@server:/> show interface wg0
name : wg0
type : wireguard
index : 10
mtu : 1420
operational status : up
ipv4 addresses : 10.0.0.1/24 (static)
ipv6 addresses : fd00::1/64 (static)
peers : 2
Peer 1:
public key : ROaZyvJc5DzA2XUAAeTj2YlwDsy2w0lr3t+rWj2imAk=
status : UP
endpoint : 192.168.10.2:51821
latest handshake : 2025-12-09T22:51:38+00:00
transfer tx : 1412 bytes
transfer rx : 1324 bytes
Peer 2:
public key : Om9CPLYdK3l93GauKrq5WXo/gbcD+1CeqFpobRLLkB4=
status : UP
endpoint : 2001:db8:3c4d:20::2:51822
latest handshake : 2025-12-09T22:51:38+00:00
transfer tx : 1812 bytes
transfer rx : 428 bytes
in-octets : 1752
out-octets : 3224
admin@server:/>
Example usage:
./src/statd/python/yanger/yanger -p wifi0 -x "ixll -A ssh enp195s0f0 sudo" ietf-hardware | ./board/common/rootfs/usr/libexec/infix/wifi-channel-map.py
Show the congestion in the 2.4 band.
Signed-off-by: Mattias Walström <lazzer@gmail.com>
* Add support for AP (list connected stations)
* Add scan-mode (Scan without create a fully configured station)
Signed-off-by: Mattias Walström <lazzer@gmail.com>
Finit is capable of setting up all basic file systems, even /run but
Infix relies on it allowing executing scripts (dagger and container)
so leave that for now.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The cfg.ext4 disk image was created but not formatted because mkfs.ext4
wasn't found. As sbin is not in PATH for an unprivileged user in
Debian.
This caused the VM boot to fail with "No persistent storage found for /cfg".
Signed-off-by: Richard Alpe <richard@bit42.se>
Actually disable iitod on Styx DCP-SC-28p to work around #670, this
prohibits software control of LEDs, leaving the default HW control,
which has proven more stable on this platform.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Joachim Wiberg