Add a new service that, when enabled, will execute run-parts on
`/cfg/user-scripts.d`.
This strikes a balance between two conflicting objectives:
1. There should be no implicit way to schedule arbitrary code
execution on the device, i.e. no default run-parts directory.
2. It is very useful to have a way of scheduling arbitrary code
execution on the device, e.g. being able to install a debug script
on a production image.
With this feature, we still meet (1), since the feature has to be
explicitly enabled in the startup-config; but we also fulfill (2),
since we can easily enable it when needed.
This fixes a serious security regression introduced late in the v24.04
release cycle. The root cause is the placement of the shadow file in
the rootfs overlay, which causes any changes made by the Buildroot
setting BR2_TARGET_ENABLE_ROOT_LOGIN to be discarded/overwritten just
before creating the squashfs image.
The fix in this commit relocates all files from b4eb450 to the skeleton
in Infix, package/skeleton-init-finit/skeleton/etc, which is one of the
first packages to be installed when starting a build.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Backport fix to allow raw kernel logs to console
- Save 10 rotated (and gzipped) backups of all logs
The latter change was discussed a few weeks ago. We determined it was a
safe number since all active products have eMMC with *lots* of storage.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Refactor setup to automatically redirect http -> https, dropping
the /browse location for now.
Also, log to syslog, which has log rotation.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
On every system reconf (initctl reload) the .conf files are evaluated
again and log notices about skipping alternative syslogd enties are
logged.
We know that we run the udevd dependend syslogd entry, and everything
else basically in runlevel S depends on it, so not much else would work
if syslogd didn't start. So we can safely set 'nowarn'.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Classic builds don't have udev but rather mdev or mdevd. This patch
imports support from myLinux for conditionally starting sysklogd on
classiic builds.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Since watchdogd may need to run with SCHED_RR, when the supervisor is enabled,
which is not supported by cgroupsv2, we ask Finit to always runs it in the
root cgroup. We must also raise the limit for rtprio to all possible values
for SCHED_RR that a user can set in /etc/watchdogd.conf
Finally, add support for reading extra args from /etc/default/watchdogd
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
A very limited part of the YANG model is implemented so far, basicly it is OSPFv2 with multiple areas and you can change timers
for the interfaces. Limited operational support.
admin@infix-00-00-00:/config/> edit routing control-plane-protocol ietf-ospf:ospfv2 name default
admin@infix-00-00-00:/config/routing/control-plane-protocol/ietf-ospf:ospfv2/name/default/> set ospf area 0.0.0.0 interface e0 enabled true
admin@infix-00-00-00:/config/routing/control-plane-protocol/ietf-ospf:ospfv2/name/default/> leave
When Infix Fail Secure Mode ends up in RMA state, runlevel 9, we should
not allow Finit to "time out" and give us a login prompt. Instead we
disable all login services in runlevels 7-9, reserving these extra
levels for future failure modes.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The sysklogd and BusyBox syslogd can not run at the same time. Since they
provide the same service we standardize on them providing <pid/syslogd>.
Also, ensure syslogd does not start until the fifth udevadm has completed.
This creates a barrier preventing other run/task/services from starting
too early. Thus guaranteeing a proper boot order.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Instead, use the version from package/skeleton-init-finit, including the
ssh-hostkeys (previously ssh-genhostkeys) from the same package, because
it include extensive error handling and logging on failure.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This change addresses a problem accessing Infix over SSH. The root cause
turned out to be the hostkeys, which live in /var/lib/ssh and not in /etc
on Infix, were corrupt.
The corruption was interesting in that they all existed, but had size 0.
This state was not caught by our ssh-genhostkeys script and that is what
this change attempts to fix.
As before this change, the script starts by calling `sshd -t` to verify
they hostkeys. Unlike before we now check for 'invalid format' in the
output of that command. If any file with invalid format is found, we
remove them and regenerate the hostkeys.
In this investigation it was found that the 'ssh-keygen -A' command that
generates hostkeys does not use the directories specified for the given
files in sshd_config, instead it always saves the files to /etc/ssh.
Also, since there is no panic in getting the hostkeys generated we can
allow the script to wait for syslogd to start before we run, even though
it all happens in runlevel S.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Also, for usability, add `name:<SVC>` to each service declaration so they
can be located more easily and/or enabled/disabled using the service they
provide.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- allow custom options sourced from optional /etc/default/smcrouted
- don't enable smcrouted by default when enabled in Buildroot .config
because normal use-cases require an /etc/smcroute.conf
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Some critical services must never be stopped, and with the unfortunate
separation of runlevel S and 0 in Finit recently, all affected service
definitions must be updated.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- board/common: drop everything not needed by NETCONF mode
- board/classic: most board/common helpers relocated here
- Simplify Finit scripts for critical services
- Source variant from /etc/os-release to select ramdisk /etc
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit adds multi-nameserver support using openresolv (resolvconf)
and dnsmasq. This means that a DHCP client (dhcpcd) or VPN client can
be providers of nameservers to the system. Dnsmasq takes over as the
system resolver, except when the user has set up static configuration.
Static nameserver(s), as well as search and options, are always added
first by openresolv to /etc/resolv.conf.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Chrony drops privs after startup to user chrony, when restarting it
writes its state in /var/lib/chrony, so the directory needs to have
the correct permissions for that user.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Split tmpfiles config in two, one for snmpd and one for profeth.
Add logging and redirect profeth logs to /log/profinet.log with
default log rotation.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
An Infix build with PROFINET gears Net-SNMP heavily towards acting as a
servant to profeth (p-net stack). This will be hard-coded for now until
we've integrated it all better in Clixon.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
1. Use same naming standard for quagga and frr
2. Only one of quagga and frr can be used at the same time
3. Subdirectories in available/ only in the skeleton, not on target
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Only install the corresponding Finit svc if the package is selected in
the Buildroot menuconfig. Some packages cannot be enabled by default
though, since they require a daemon configuration file, e.g. in the
case of ulogd it requires a valid /etc/ulogd.conf
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Also needs /var/cache/nginx when starting up. Requires separate patch
for now, but will be added a tmpflies.so plugn to Finit.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The whole of /var may be read-only, while /run is a newstyle ramdisk.
The /run/lock directory is created by the Finit bootmisc.so plugin at
boot.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This adds Finit support for starting chronydy and mstpd, as well as
an update to inadyn supporting env file for custom args.
Also included is a patch to the start script of mstpd for BusyBox pidof,
which don't have the '-c' option.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Tobias Waldekranz