Releases exposed the RAUC upgrade bundle only inside the per-arch
tarball, and shipped no ready-to-flash Raspberry Pi image; users had
to unpack the tarball or assemble an image from a separate bootloader.
Upload output/images/*.pkg as its own artifact, and build an rpi64 SD
card image in the aarch64 release leg before rootfs.squashfs is
stripped from the tarball, combining it with the rpi64 bootloader from
the latest-boot release. Publish both as release assets; the tarball
still carries the .pkg too.
Closes#1084
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Resetting a zone's services (or interfaces) wiped the entire zone:
action, interfaces, address-sets, everything but the name.
The keyed zone GET decodes into a wrapper expecting the node bare, but
the server nests it under the full parent path:
{"infix-firewall:firewall": {"zone": [ ... ]}}
The decode silently matched nothing, so the reset handler rebuilt the
zone from an empty struct and PUT only the zone name. The same
mismatch also broke network preservation when saving a zone.
Clear leaf-lists by deleting each instance instead of rebuilding the
zone with PUT, so a reset cannot touch anything else. Fix the wrapper
shape, document the nesting convention on the RESTCONF client Get, and
log a warning when a non-empty response decodes to a zero-valued
wrapper. When saving zones, omit empty leaf-lists and a defaulted
action. Refresh the firewall page after resets and update the handler
tests to mock the real response shape.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Add firewall address-sets: named sets of IP addresses and networks,
usable as zone sources for per-IP access control, issue #1189. Static
entries are part of the configuration; dynamic entries are managed at
runtime with new add/remove/flush actions, from the CLI or over
NETCONF/RESTCONF. Dynamic entries survive firewall configuration
changes but are not saved to the configuration. Sets with a timeout
expire their entries automatically.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Previously at least one end of a veth pair had to remain in the host
namespace, because that end created and destroyed the pair. Assigning
both ends to containers left no one to create it.
Select a deterministic primary end so exactly one side creates the pair.
When the primary is itself a container interface, create the pair in the
host namespace before the container starts; CNI host-device then moves
each end into its container. Teardown is deferred to the container
removal script so the pair does not linger and block re-creation.
Drop the now-obsolete limitation notes from the documentation and YANG,
and add a regression test connecting two containers over a veth pair.
Fixes: #941
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Extend the existing 'show <running|startup|factory>-config' family with an
optional 'path /XPATH' argument that maps straight to the underlying 'copy
-x' flag, and add 'show operational [path /XPATH]' for symmetry with the
configuration datastores.
admin@example:/> show running-config path /ietf-interfaces:interfaces
admin@example:/> show operational path /ietf-system:system-state
Also, improve error feedback from the copy command slightly.
Before:
admin@example:~$ copy running -x /foo
Error: (null) (5)
Error: failed retrieving running-config data
After:
admin@example:~$ copy running -x /foo
Error: Couldn't parse path "/foo": Prefix "foo" not defined. (5)
Error: failed retrieving running-config data
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Fix#1506: restore the VLAN interface documentation that was lost when
networking.md was split into per-topic pages. Content adapted from the
v25.11.0 networking.md VLAN section, plus a new "Stacked (Q-in-Q)"
section showing `eth0.10.20`-style nesting and the layered `show
interface` rendering of the parent chain.
Update the interface-type table in networking.md to point at the new
vlan.md instead of the dangling ethernet.md#vlan-interfaces anchor.
ChangeLog: document the user-facing changes on this branch (YANG model
upgrade, layered show interface output, auto-negotation typo fix) and
the new VLAN documentation.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Summary of Changes:
bfdd:
- cap IPv6 echo reflection to declared length
- account for FP offset in echo length checks
- fix recv errno filter logic in a few places
- tighten SBFD reflector packet sanity checks
- gate IPv6 echo reflection on known sessions
- tighten auth header parsing skeleton
- validate control packet length before session lookup
bgpd:
- Fix memleak when configuring rd
- Validate if NHC BGPID TLV value is non-zero
- Avoid having a dangling pointer after we free NHC attribute
- Check if BGPID NHC TLV exists when IPv6 next-hop is link-local
- Do not allocate NHC TLV with an extra trailer
- migrate timers during peer_xfer_conn to fix stale route cleanup
- honor 'no activate' for dynamic neighbors in peer-group
- Return immediately when dynamic capability action is not valid
- Validate BGP role capability when handling it dynamically
- fix neighbor IP comparison for IPv6 memcmp return values
- Don't mark nexthop as changed if a set next-hop unchanged is applied
- Return BGP_PEER_INTERNAL when first peer's as type is set to auto
- Update peer sort cache when remote-as auto is used and AS number changed
- Check dynamic capability action before validating ENHE capability
- Do not allocate stream if route-refresh capability is not received
- Move rpki strict check to bgp_accept()
- Fix memory leak for nhc attribute if ipv6 is link-local address
- Fix compilation for Debian 11 when printing uint64 values
- Return zero labels if no BOS found and it's not a withdraw label
- Fix signed overflow in hexstr2num()
- Check the length also when parsing ENCAP attr sub-TLVs
- Validate prefixlen before subtracting when parsing labeled unicast NLRI
- Reset the stream to attr_start + attribute_len when WITHDRAWN
- Revalidate locally originated routes against RPKI changes
- Check if prefixlen is not 0 when parsing flowspec stuff
- Prevent len_string going negative when trying to display flowspec entries
- fix import vrf on non existing vrf
- fix no vrf import command
- Free hostname for FQDN capability if the parsing goes wrong
- Validate MP_REACH_NLRI attribute against incorrect next-hop
- Fix dynamic FQDN capability handling
- Check if the remaining length for subtracting TLV length is enough
- Fix the end pointer boundaries for dynamic graceful restart capability
- Add missing returns when parsing enhanced route-refresh
- Return original as-path when reconciling AS versus AS4
- Do not process route-refresh for AFI/SAFI if it's not negotiated
- Check if we are not overusing error_data buffer when unknown cap received
- fix NHT for explicit link-local BGP peers
- improve packet parsing for EVPN and ENCAP/VNC
- Prevent heap use-after-free for tunnel encapsulation attribute
- Return 0 if AS4 capability is malformed
- close dynamic peer socket in ttl error path
- fix logic handling EVPN_FLAG_DEFAULT_GW
- avoid early return in MPLSVPN NLRI processing
- remove unneeded asserts in packet reads
eigrpd:
- fix byte order in Hello TLV decode functions
- Handling for malformed update packets
- enforce minimum TLV length in Hello handler
- reject invalid prefix mask len
- skip unknown and ignored TLVs
- Improve packet validation
isisd:
- Reject SRv6 Locator TLV with Loc-Size of zero
- consume leftover bytes after FAD sub-sub-TLV loop
- use correct min size values for srv6 subtlvs
- improve validation of flex-algo decoder
- Fix missing neighbor address Sub-TLVs after link-params change
- add unit test for remove_excess_adjs() memory leak fix
- fix memory leak in remove_excess_adjs()
- fix edge condition in max_lsp_count computation
ldpd:
- improve tlv validation in several places
lib:
- Report IPv6 MTU and not IPv4 for if_update_state_mtu6
- disable warning in zlog.c to match master
nhrpd:
- stop debugging auth credentials
- fix byte-order when comparing error code in shortcut path
- guard against zbuf_pulln NULL on truncated packets
- require auth for all received packet types
- harden debug packet parsing against malformed input
- validate AFI index in extension replies
ospf6d:
- move log call out of priv block
- remove asserts in packet-handling paths
- fix issues in ospf6 auth trailer code
ospfd:
- add LSA validation in the apiserver path
- add validation in several places before accessing
pceplib:
- validate during of_list TLV decoding
pimd:
- fix NOCACHE MFC resync detection log, add vrf name too
- use upstream-owned pim pointer in register and upstream timers
- use upstream-owned pim pointer in MSDP update paths
- avoid JP build deref through channel OIL
- guard RP RPF-failure mroute delete on detached OIL
- avoid null deref in upstream delete debug path
- guard channel OIL detach against stale pointers
- fix crash due to double free
- Ensure igmp message is of proper size
- Reject pim packets with a malformed header length
- Fix out of bounds read in AutoRP code
- igmpv3 never checks packet length and trusts the num-sources field
- Do not allow a register-stop message if not received from the RP
- Prevent received msg length from being larger than buffer
- Remove unnecessary asserts
- When receiving a register stop ensure we have enough data to read
- Ensure a register packet has enough space to read S,G data
- Ensure that header has space on packet
ripngd:
- fix data handling in several places
tests:
- Check if route-map with set nexthop unchanged does not prevent outgoing
- Check if mixed peer-group remote-as types can be used with auto
- Verify neighbor addr Sub-TLVs after link-params reset
- Expect return code being 0, not -1 when AS4 is empty or ASN is 0
vrrpd:
- replace some asserts
- only support ethernet in GARP code
- limit advertised timers to 12-bits
Signed-off-by: Mattias Walström <lazzer@gmail.com>
Add board support for the BananaPi BPI-R4 router board, based on the
MediaTek MT7988A (Filogic 880) SoC with quad-core Cortex-A73 CPU.
The BPI-R4 is the successor to the BPI-R3 but uses entirely different
silicon: the internal switch runs at 2.5 GbE per port, the two SFP+
uplinks use native USXGMII at up to 10 Gbps, and WiFi is provided by
a MediaTek MT7996E PCIe module supporting tri-band WiFi 7 (2.4/5/6 GHz).
Two board variants, BPI-R4-2g5 and BPI-R4P, replace one SFP+ cage with
a 2.5 GbE RJ45 port (using the MT7988A internal 2.5G PHY); the R4P adds
an optional PoE daughterboard on that port. Both use the upstream
mt7988a-bananapi-bpi-r4-2g5 device tree.
Interfaces:
- Standard R4: eth1 (gmac1/sfp2 LAN cage) → sfp2, eth2 (gmac2/sfp1 WAN cage) → sfp1
- R4-2g5/R4P: eth1 (2.5G PHY) → wan, eth2 (gmac2/sfp1 WAN cage) → sfp1
Factory reset / WPS button (GPIO14, active-low): detected by U-Boot at
boot for factory reset; reused by Linux as KEY_WPS_BUTTON at runtime.
eMMC install note: the MT7988A eMMC (pins 38-49) and SD card (pins 32-37)
use separate physical pads so there is no electrical bus sharing, unlike
some BPi-R3 configurations. However, a single MMC controller
(mmc@11230000) handles both, so only one is active per boot session.
The eMMC install procedure therefore still requires an intermediate SPI
NAND bootloader step until a Linux-side install path is tested.
SD card build (bpi_r4_sd_boot_defconfig) now uses the new
mt7988a_bpir4_sd U-Boot defconfig with cap-sd-highspeed enabled,
giving 50 MHz SD transfers instead of the previous 25 MHz legacy mode.
Also adds MT7988/MT7996 firmware support to the buildroot linux-firmware
package, for 2.5 GbE port PHY and WiFi7 extension board, and updates the
aarch64_defconfig, aarch64_minimal_defconfig, the arch README, CI
boot/image workflows, mkimage.sh, and the ChangeLog.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Issue #1461 turned out to just be a flaky test, the change in this
commit only bumps the release date.
[skip ci]
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Add several entries that were missing from the original release notes,
most notably the SBSA watchdog fix for CN913x (Marvell Octeon) platforms
and the BPI-R3 watchdog fix, plus show keystore, ixll scan, show system
temperature, WiFi signal strength inversion fix, and follow command fix.
[skip ci]
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
ael-bot