imx8mp-evk: Add USB and HDMI support

2026-08-06 15:43:02 +02:00 · 2025-05-07 13:24:04 +02:00
parent 7560da80a7
commit d8cbdd7d92
3 changed files with 124 additions and 0 deletions
@@ -1,6 +1,109 @@
 #include <arm64/freescale/imx8mp-evk.dts>
+#include <dt-bindings/usb/pd.h>
+&usb3_phy0 {
+
+	status = "okay";
+};
+&iomuxc {
+	pinctrl_typec_mux: typec1muxgrp {
+		fsl,pins = <
+		MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20	0x16
+		>;
+	};
+	pinctrl_typec: typec1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19	0x1c4
+		>;
+	};
+};
+
+&i2c2 {
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		reg = <0x50>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <19 8>;
+
+		port {
+			typec_dr_sw: endpoint {
+				remote-endpoint = <&usb3_drd_sw>;
+			};
+		};
+
+		usb_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+			PDO_VAR(5000, 20000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+					typec_con_ss: endpoint {
+						remote-endpoint = <&usb3_data_ss>;
+					};
+				};
+			};
+		};
+	};
+};
+&usb3_phy0 {
+	fsl,phy-tx-vref-tune = <0xe>;
+	fsl,phy-tx-preemp-amp-tune = <3>;
+	fsl,phy-tx-vboost-level = <5>;
+	fsl,phy-comp-dis-tune = <7>;
+	fsl,pcs-tx-deemph-3p5db = <0x21>;
+	fsl,phy-pcs-tx-swing-full = <0x7f>;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	role-switch-default-mode = "none";
+	snps,dis-u1-entry-quirk;
+	snps,dis-u2-entry-quirk;
+	status = "okay";
+
+	port {
+		usb3_drd_sw: endpoint {
+			remote-endpoint = <&typec_dr_sw>;
+		};
+	};
+};

 / {
+	gpio-sbu-mux {
+		compatible = "gpio-sbu-mux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec_mux>;
+		switch-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
+		orientation-switch;
+
+		port {
+			usb3_data_ss: endpoint {
+				remote-endpoint = <&typec_con_ss>;
+			};
+		};
+	};
        chosen {
                infix {
                        /* "admin" */