peter/infix
1
0
Fork 0
mirror of https://github.com/kernelkit/infix.git synced 2026-07-22 01:13:00 +02:00
Code Issues Packages Projects Releases Wiki Activity

board/aarch64: add missing mmc partconf command to BPi-R64 U-Boot

Browse Source 
Also, simplify board README a bit now that we know that you don't need
to flip the boot switch to program eMMC.

[skip ci]

Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit is contained in:
Joachim Wiberg
2026-04-10 11:19:35 +02:00
parent 6c879d81d1
commit 69d599e2ab
3 changed files with 18 additions and 23 deletions
Download Patch File Download Diff File Expand all files Collapse all files
board/aarch64/bananapi-bpi-r64/README.md
+15 -23
View File
@@ -30,20 +30,15 @@ Infix comes preconfigured with:
<img align="right" src="bpi-r64-sw1.png" alt="SW1 Boot Switch" width=90 padding=10>
The BPI-R64 uses a 2-position DIP switch (SW1) to select the boot device
order. The MT7622 Boot ROM tries devices in the order listed and falls
back to the next if no valid BL2 is found at the expected location.
The BPI-R64 has a 2-position DIP switch (SW1) for selecting the boot device.
The MT7622 Boot ROM always tries SD first if a card is present, so you can
leave SW1 in the OFF (eMMC) position and simply insert or remove an SD card
to control boot device selection.
| SW1 | Boot device | Use case |
|-----|-------------|----------------------------|
| OFF | eMMC | Production eMMC boot |
| ON | SD card | SD card boot / development |
> [!NOTE]
> SinoVoip has exposed only one bit of the MT7622's two-bit `BOOT_SEL[1:0]`
> strapping field via SW1, with `BOOT_SEL[1]` hardwired high. This limits the
> board to eMMC (`10b`) and SD (`11b`) boot; the SPI-NOR and SPI-NAND modes
> available on the MT7622 reference board (`00b`, `01b`) are not selectable.
| SW1 | Boot device |
|-----|-------------|
| OFF | eMMC |
| ON | SD card |
## Getting Started
@@ -58,11 +53,10 @@ back to the next if no valid BL2 is found at the expected location.
dd if=infix-*-bpi-r64-sdcard.img of=/dev/sdX bs=4M status=progress
```
2. **Set boot switch:** SW1 ON (SD card boot)
3. **Insert SD card and power on**
4. **Connect console:** 115200 8N1 — use the dedicated Debug UART header
2. **Insert SD card and power on**
3. **Connect console:** 115200 8N1 — use the dedicated Debug UART header
just below the 40-pin GPIO header; pins are labeled GND, RX, TX on the board
5. **Default login:** `admin` / `admin`
4. **Default login:** `admin` / `admin`
## Installing to eMMC
@@ -84,9 +78,8 @@ drive.
#### Step 1: Boot from SD card
1. Set SW1 to ON (SD boot)
2. Insert SD card with Infix
3. Power on and break into U-Boot (press Ctrl-C during boot)
1. Insert SD card with Infix
2. Power on and break into U-Boot (press Ctrl-C during boot)
#### Step 2: Write the eMMC image from U-Boot
@@ -115,9 +108,8 @@ mmc partconf 0 1 1 0
#### Step 4: Boot from eMMC
1. Power off the board
2. Set SW1 to OFF (eMMC boot)
3. Remove SD card and USB drive
4. Power on
2. Remove SD card and USB drive
3. Power on
## Platform Notes
board/aarch64/bananapi-bpi-r64/uboot/emmc-extras.config
+1
View File
@@ -1,2 +1,3 @@
CONFIG_DEVICE_TREE_INCLUDES="infix-env.dtsi infix-key.dtsi mt7622-emmc-env.dtsi"
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_CMD_MMC_PARTCONF=y
board/aarch64/bananapi-bpi-r64/uboot/sd-extras.config
+2
View File
@@ -1 +1,3 @@
CONFIG_DEVICE_TREE_INCLUDES="infix-env.dtsi infix-key.dtsi mt7622-sd-env.dtsi"
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_CMD_MMC_PARTCONF=y