peter/infix
1
0
Fork 0
mirror of https://github.com/kernelkit/infix.git synced 2026-07-22 01:13:00 +02:00
Code Issues Packages Projects Releases Wiki Activity

doc: minor updates to the CLI online help text

Browse Source 
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit is contained in:
Joachim Wiberg
2023-11-24 12:35:46 +01:00
parent 630a005bef
commit 56c3b4a880
2 changed files with 20 additions and 20 deletions
Download Patch File Download Diff File Expand all files Collapse all files
doc/cli/introduction.md
+12 -12
View File
@@ -35,7 +35,7 @@ The system has several datastores (or files):
To save configuration changes made to the `running-config` so the system
will use them consecutive reboots, use the `copy` command:
admin@infix-12-34-56:/> copy running-config startup-config
admin@host-12-34-56:/> copy running-config startup-config
In *configure context* the following commands are available:
@@ -64,17 +64,17 @@ We inspect the system status to ensure the change took effect. Then we
save the changes for the next reboot.
```
admin@infix-12-34-56:/> configure
admin@infix-12-34-56:/config/> edit interfaces interface eth0
admin@infix-12-34-56:/config/interfaces/interface/eth0/> set ipv4 <TAB>
admin@host-12-34-56:/> configure
admin@host-12-34-56:/config/> edit interfaces interface eth0
admin@host-12-34-56:/config/interfaces/interface/eth0/> set ipv4 <TAB>
address autoconf bind-ni-name enabled
forwarding mtu neighbor
admin@infix-12-34-56:/config/interfaces/interface/eth0/> set ipv4 address 192.168.2.200 prefix-length 24
admin@infix-12-34-56:/config/interfaces/interface/eth0/> show
admin@host-12-34-56:/config/interfaces/interface/eth0/> set ipv4 address 192.168.2.200 prefix-length 24
admin@host-12-34-56:/config/interfaces/interface/eth0/> show
type ethernetCsmacd;
ipv4 address 192.168.2.200 prefix-length 24;
ipv6 enabled true;
admin@infix-12-34-56:/config/interfaces/interface/eth0/> diff
admin@host-12-34-56:/config/interfaces/interface/eth0/> diff
interfaces {
interface eth0 {
+ ipv4 {
@@ -84,14 +84,14 @@ interfaces {
+ }
}
}
admin@infix-12-34-56:/config/interfaces/interface/eth0/> leave
admin@infix-12-34-56:/> show interfaces brief
admin@host-12-34-56:/config/interfaces/interface/eth0/> leave
admin@host-12-34-56:/> show interfaces brief
lo UNKNOWN 00:00:00:00:00:00 <LOOPBACK,UP,LOWER_UP>
eth0 UP 52:54:00:12:34:56 <BROADCAST,MULTICAST,UP,LOWER_UP>
admin@infix-12-34-56:/> show ip brief
admin@host-12-34-56:/> show ip brief
lo UNKNOWN 127.0.0.1/8 ::1/128
eth0 UP 192.168.2.200/24 fe80::5054:ff:fe12:3456/64
admin@infix-12-34-56:/> copy running-config startup-config
admin@host-12-34-56:/> copy running-config startup-config
```
One of the ideas behind a separate running and startup configuration is
@@ -99,7 +99,7 @@ to be able to verify a configuration change. In case of an inadvertent
change that, e.g., breaks networking, it is trivial to revert back by:
```
admin@infix-12-34-56:/> copy startup-config running-config
admin@host-12-34-56:/> copy startup-config running-config
```
Or restarting the device.
doc/cli/tutorial.md
+8 -8
View File
@@ -1,9 +1,9 @@
User Guide
==========
The command line interface (CLI, see-el-i) is built on the open source
component [klish][1], which implements a CISCO like, or Juniper Networks
JunOS-like CLI on a UNIX system.
The command line interface (CLI, see-ell-aye) is built on the open source
component [klish][1], which implements a CISCO-like, or Juniper Networks
JunOS-like, CLI for UNIX systems.
New users always get the CLI as the default "shell" when logging in, but
the default `admin` user logs in to the Bash. To access the CLI, type:
@@ -18,11 +18,11 @@ Key commands available in any context are:
For each command it also possible to press the `?` key and `TAB` to get
more help and suggestions for completion.
> **Note:** for the sake of brevity, the hostname in the following
> examples has been shortened to `host`. The default name is composed
> from a product specific string followed by the last three octets of
> the system base MAC address, e.g., `infix-12-34-56`. An example of
> how to change the hostname is included below.
> **Note:** for the sake of brevity, the hostname in the following examples
> has been shortened to `host`. The default name is composed from a product
> specific string followed by the last three octets of the system base MAC
> address, e.g., `switch-12-34-56`. An example of how to change the hostname
> is included below.
Admin Exec