# Please note that this is only a sample, we recommend you to change it to fit
# your needs.
# You should override this file using BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE.
# See http://buildroot.org/manual.html#rootfs-custom
# and http://elinux.org/RPiconfig for a description of config.txt syntax

start_file=start4.elf
fixup_file=fixup4.dat

kernel=u-boot.bin

device_tree=bcm2711-rpi-4-b.dtb
dtoverlay=rpi-env
dtoverlay=infix-key
dtoverlay=vc4-kms-v3d-pi4
dtoverlay=vc4-kms-dsi-7inch

#ignore_lcd=0

# To use an external initramfs file
#initramfs rootfs.cpio.gz

# Disable overscan assuming the display supports displaying the full resolution
# If the text shown on the screen disappears off the edge, comment this out
disable_overscan=1

gpu_mem=256

# Enable UART0 for serial console on ttyAMA0
enable_uart=1
force_turbo=1
#dtoverlay=miniuart-bt

# Run as fast as firmware / board allows
arm_boost=1

# enable 64bits support
arm_64bit=1

# Enable early debugging info
uart_2ndstage=1
